Fanimation AIREDROP LP8069 Serie Manual Del Usuario página 14

How to Wire Your Ceiling Fan (continued)
NOTE: If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan installed
by a licensed electrician.
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan unless blades are in place. Noise and fan
damage could result.
5. After connections have been made, slide the
receiver into the hanger bracket, taking care not to
pinch the wires and put the white and green leads
to one side and the black leads towards the other
side, the connection should be turned upward and
carefully push leads into the outlet box. The wires
should be spread apart with the grounded
conductor and the equipment-grounding conductor
on one side of the outlet box and the ungrounded
conductor on the other side. (Figure 6)
Your receiver may have moved during the
6.
wiring process. Make sure receiver is positioned
all the way into the hanger bracket and that no
wires are pinched. (Figure 7)
WARNING
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
Hanger Bracket
14
White Wire
from Supply
Listed
Outlet Box
Household
Supply
White Wire
from Receiver
Black Wire
from Supply
Receiver
Black Wire
from Receiver
Figure 6
Figure 7
Receiver