Operating; Switch On - POBEL 720 720 Manual De Instrucciones

1.7.Operating

Steps to follow:
1. Connect the end wiring of the heater to the
socket, which is on the metallic base (piece 12).
2. Turn the tap on.
3. Turn the tap off when you see that the
water level is on the heater.
Rev. 020913

1.8. Switch on

Steps to follow:
1. Switch on the green switch (fig. 2, piece
10). This will light showing that the still is
connecting to the power point. The warning
light will also light (fig. 2, piece 9) showing
that the water supply is not enough.
2. Turn the tap on slowly until the pilot (fig.
2, piece 9) turn off.
• Before few minutes, the heater will be
getting red and the boiling will start. The
stilled water goes out through the outlet (fig.
2, piece 2).
• If water steam went out through steam
hole (fig. 2, piece 3), you would have to
increase water supply.
Pag: 9