Using Earphones - Shure KSE1500 Guia Del Usuario

Using Earphones

Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound
isolation. It should be easy to insert, fit comfortably, and easy to
remove.
Wearing the Earphones
1. Carefully insert the earphone into the ear like an earplug, so that a tight
seal is formed.
Important: If there is a lack of low frequency response (bass), the earphone
sleeve may not be forming a proper seal. Gently push the earphone deeper into
the ear canal or try using a a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
2. Wear earphone cables over the back of the ear to keep them in place
during physical activity. Guide the cable down either the front or back of
the body, and use the cable cinch to tighten up the remaining slack.
The fit of the earphone can greatly affect sound quality.
4
Soft Flex Sleeves: In small, medium,
and large sizes. Made from pliable
rubber.
Soft Foam Sleeves: Compress the
foam sleeve between your fingers
and insert into the ear canal. Hold in
place for about ten seconds while the
foam expands.
Triple-Flange Sleeves: If desired,
use scissors to trim the stem on
the sleeve.
Changing Sleeves
• Twist and pull to remove the sleeve
from the nozzle.
• Slide on a new sleeve so that it
completely covers the barb and
the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly
installed. Replace sleeves if they do not tightly grip the nozzle. To ensure
proper fit and performance, use only sleeves supplied by Shure (unless using
custom molded sleeves).
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
Note: Do not pull on cable to remove earphone.