Care And Cleaning; Troubleshooting - BLACK&DECKER Bl3000S Manual De Instrucciones

SPEED CHART
MIX • Remove lumps from gravies
• Reconstitute frozen juices, drink mixes and condensed
soups
• Prepare salad dressings
• Puree hot liquids
BLEND • Mix puddings
• Combine pancake and waffle batter or mixes
• Beat eggs for omelets and custards
PULSE/OFF • Use for thick mixtures
ICE CRUSH • Crush ice
CHOP • Chop fruits and vegetables
• Chop cooked meats
• Chop nuts, coarse-to-fine
SMOOTHIE • Prepare smoothies and milkshakes

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEANING
1. Before cleaning, turn oFF and unplug appliance.
2. lift blending jar by handle off power base.
3. Remove jar base by turning counterclockwise until loose.
4. Remove gasket and blade assembly.
Caution: Blades are sharp, handle carefully.
5. Remove lid and measuring cup lid insert.
6. Wash removable parts by hand or in your dishwasher. Place jar on bottom
rack and the rest of parts on top-rack only.
Important:
• do not place jar parts in boiling liquids.
• do not immerse base in liquid. Wipe base with damp cloth and dry thoroughly.
• Remove stubborn spots by rubbing with damp cloth and nonabrasive cleaner.
Note: If liquids spill onto base, wipe with damp cloth and dry thoroughly. do not
use rough scouring pads or cleansers on parts or finish.
QUICK CLEANING
For quick cleanup, combine 1 cup of hot water and a drop of liquid dish soap in
the blending jar. Cover and blend on MIX for about 30 seconds. discard liquid
and rinse jar thoroughly.
STORAGE
For convenient storage, wrap the cord around the supports on the bottom
of the blender base.
8

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Jar bottom does not A vacuum has been
come off of jar. formed.
liquid is leaking from Gasket is either
bottom of jar. missing or not in
place correctly.
Appliance does not Appliance is not
turn on. plugged in.
Mixture in blender Not enough liquid
does not seem to be in mixture being
blending. blended or too
much ice.
Herbs or bread are Blender jar, food to
sticking to sides be chopped and/or
of blender and not blade are not dry.
getting chopped.
Food chopped is too Food is over
fine or watery. processed.
SOLUTION
Place the jar on the
blender and turn
counter clockwise until
jar is released from
the bottom.
Check that jar is
assembled correctly.
Check that appliance is
plugged into a working
outlet.
Turn the blender off and
use a rubber spatula to
redistribute the food; add
some liquid and pulse
the mixture to aid in the
blending process.
Always make sure that the
jar, the blade and the food
to be chopped are dry.
Use PUlSe in short bursts
or blend for a shorter time.
9