Velleman CAMCOLVC8N Manual Del Usuario página 4

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
Recording
• Point the camera [5] towards the field of interest.
• Press and hold the control button [3] for 3s. The status LED [6]
flashes 3 times and switches off. The device is now recording. The
recorded format is AVI.
• Press the control button [3] again to stop recording. The LED [6]
turns orange again. Note that this might take a few seconds.
Note: when the memory is full or battery power becomes low, the
current file is saved and the device powers off automatically
Play back
• Connect the included USB cable to the USB port [7] and insert the
other end into a USB port of a computer (not incl.).
• The status LED [6] will light up orange and the device will now act
as a regular USB memory device. Copy, open or delete the
recordings as you would with other files on your computer system.
Note: stop the USB device in the appropriate way before
disconnecting from the US port.
Charging
• When the status LED [6] is flashing slowly, battery power is low.
• The battery charges when the device is connected to a powered
USB port or USB power adaptor (not included).
Reset
• When the device does not react anymore, use a small pin (e.g. a
paper clip) to gently press the reset-button [8].
7. Update system time
• Create a text file named TAG.txt.
• In that text file, enter the date and time in the following format:
[date]
YYYY/MM/DD
hh:mm:ss
(YYYY=year, MM= month, DD= date, hh=hour, mm=minutes,
ss= seconds)
• Plug the CAMCOLVC8N into the USB port of your PC.
• Copy TAG.txt to the root directory of the CAMCOLVC8N.
• Shut the USB device down in a proper way and unplug it from the
USB port.
• Switch on the CAMCOLVC8N. At this point, date and time as
specified in the TAG.txt file are loaded into the system memory
and the file itself is removed from the directory.
8. Battery
This recorder contains an internal rechargeable battery. When the
device is end-of-life, this battery has to be removed.
Wear sufficient and appropriate protection (goggles, gloves ...)
when breaking the housing.
30.05.2011
CAMCOLVC8N
4
Rev. 01
©Velleman nv
Tabla de contenido
loading

Tabla de contenido