Removing The Blade - Sunbeam OSKAR JR. 4816-8 Manual De Instrucciones

Removing the Blade:

When you have finished chopping, UNPLUG THE
ELECTRICAL CORD FROM THE OUTLET. Remove the Cover.
Remove the Chopping Blade with food clinging to it before
removing any food from the Container. The blade is extremely
sharp. Use caution when removing this blade. Clean the blade
with a scraper over the bowl.
NOTE: ALWAYS WAIT FOR THE BLADE TO COME TO
A COMPLETE STOP BEFORE REMOVING THE COVER
Removing the Container:
Place the Cover on the Container. Use the Cover to help
remove the Container. Rotate the Cover clockwise 180 degrees
until the two tabs on the cover meet the two Container tabs.
Continue to turn the Cover, using firm pressure, with your
thumb against the tabs until the Container is released. Empty
the remaining food from the Container.
Cleaning, Storing, and Caring for Oskar ® Jr.
When you have finished chopping, unplug the unit from the electrical outlet and remove
the Cover, Chopping Blade and the Container from the Motor Base. Wipe the base of your
unit with a damp cloth, then polish it lightly with a dry one. NEVER IMMERSE THE
MOTOR BASE IN ANY LIQUID.
DO NOT WASH ANY PARTS IN AN AUTOMATIC DISHWASHER.
Wash the Container and Cover in warm, soapy water. Rinse and dry immediately.
Wash the Chopping Blade by hand. Avoid placing the Chopping Blade in soapy water
where it can be lost from sight.
REMEMBER TO USE EXTREME CAUTION WHEN HANDLING THE CHOPPING BLADE.
IT IS VERY SHARP!
Cleaning the internal shaft of your Chopping Blade is most important. We suggest the use
of a small percolator or baby bottle brush to remove any food particles, then wash and dry
the shaft thoroughly.
®
Sunbeam suggests that you store the Oskar Jr. Chopper Plus on a dry counter or table top
in your kitchen, where it will always be ready for immediate use. Store the Chopping Blade
in the clear Container (OUT OF THE REACH OF CHILDREN). The Blade is EXTREMELY sharp!
Use caution when handling the blade.
6