Clock / Calendar; Moon Phase; Auto Scanning Function; Weather Forecast - Oregon Scientific WMR86NS Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
WMR86NSA:
WWVB-60 signal: within 3200km (2000 miles) of Fort
Collins Colorado.
WMR86NS only - slide the EU / UK switch to the
appropriate setting based on your location. Press RESET
whenever you change the selected setting.
The reception icon will blink when it is searching for a
signal. If the radio signal is weak it can take up to 24
hours to get a valid signal reception.
indicates the status of the clock reception signal.
ICON
MEANING
Time is synchronized. Receiving signal is
strong
Time is not synchronized. Receiving signal
is weak
To enable (and force a signal search) / disable the
clock radio reception (clock synchronization):
1. Press SELECT to navigate to the Clock / Calendar /
Moon Phase Area.
will show next to the Area.
2. Press and hold SEARCH.
appears when it is enabled.
NOTE
For best reception, the base station should be
placed on a flat, non-metallic surface near a window in an
upper floor of your home. The antenna should be placed
away from electrical appliances and not be moved around
when searching for a signal.

CLOCK / CALENDAR

To manually set the clock:
(You only need to set the clock and calendar if you have
disabled the clock radio reception).
1. Press SELECT to navigate to the Clock Area.
show next to the Area.
2. Press and hold MODE to change the clock setting.
The setting will blink.
3. Press
/
to increase / decrease the setting value.
4. Press MODE to confirm.
5. Repeat steps 3 to 4 to set the time zone offset hour
(+ / -23 hours), 12 / 24 hour format, hour, minute,
year, date / month format, month, date and weekday
language.
NOTE If you enter +1 in the time zone setting, this will
give you your regional time plus 1 hour.
If you are in the US (WMR86NSA only) set the clock to:
Pacific time
Mountain time
Central time
Eastern time.
NOTE The weekday is available in English (E), German
(D), French (F), Italian (I), Spanish (S) or Russian (R).
To change the clock display:
1. Press SELECT to navigate to the Clock Area.
show next to the Area.
2. Press MODE to toggle between:
• Clock with Seconds
• Clock with Weekday
• Calendar

MOON PHASE

The Calendar must be set for this feature to work (see
Clock / Calendar section).
New Moon
Waxing
Crescent
First quarter
Waxing Gibbous

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity
auto-scan function:
1. Press SELECT to navigate to the Temperature or
Humidity Area.
2. Press and hold MODE to activate auto-scan. The
temperature and humidity display will scroll from
indoor to ch1 through to ch3.
3. Press any key except the LIGHT to stop the auto-scan.
NOTE Channel 1 is used for the outdoor temperature
and humidity sensor. Additional temperature and humidity
sensors can use other channels.

WEATHER FORECAST

will
The weather display in the top part of the screen shows
the current weather and the weather forecast for the next
12-24 hours
within a 30-50 km (19-31 mile) radius.
Weather Forecast Area
ICON
7
Full Moon
Waning
Gibbous
Third
quarter
Waning
Crescent
will show next to the Area.
DESCRIPTION
Sunny
Partly cloudy
Cloudy
Rainy
Snowy
will
Tabla de contenido
loading

Este manual también es adecuado para:

Wmr86nsa

Tabla de contenido