Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Always remove the kettle from the power base (1) before filling it or
•
before any operation.
Open the lid (5) by pressing on the lid opening button (4) and fill the
•
tank with fresh water, paying attention not to fill under the minimum
mark or above the maximum mark indicated on the glass housing
of the kettle (7).
Close the lid by pressing it down until it you hear a click. Make sure it
•
closes correctly.
Make sure the spout filter is well in position, as else the auto-shut off
•
feature might not work.
Put the kettle onto the power base (1), plug into the wall socket,
•
and switch on with the switch on the handle (3). The blue light ring
(8) will come on, indicating that the appliance is operating. If it
does not come on, check if the kettle is correctly positioned on the
base and check if the base is plugged in. Do not open the lid while
the water is heating or boiling.
The cordless water kettle will switch off automatically when the water
•
has boiled. However, you can stop the appliance anytime by putting
the switch in off position or lifting the kettle from the power base.
CAUTION: Make sure that the lid is closed and the filter is correctly and
securely fitted before switching on the appliance. Failure to do so will
cause the kettle not to switch off.
•
For instant re-boiling, wait until water has cooled down and switch
on the appliance again.
•
The kettle will not re-boil until the switch is pressed again.
•
The kettle may be stored on the power base when not in use.
•
Always disconnect the power supply when not in use.
•
When pouring a large quantity of hot water, pour slowly and do not
incline the kettle past the horizontal line to avoid burns and injuries.
www.KALORIK.com
7
JK 42458 - 180330
Tabla de contenido
