All operating elements can be found on the
fold-out page 3.
1 Operating Elements
1.1 Fig. 1: Hand-held microphone
1 Microphone cartridge; to insert batteries,
unscrew the cartridge (figs. 2 to 4)
2 LC display; indicates the transmission fre-
quency and the charging status of the bat-
teries during operation
3 Cap for the control part; remove the cap for
operation (fig. 5)
4 Power switch
1.2 Figs. 2 to 4: Inserting batteries
(microphone cartridge unscrewed)
5 4-pole contact, each on the microphone
cartridge (fig. 2) and on the handle (fig. 3);
prior to assembling microphone cartridge
and handle, fit the contacts together
6 Lock for the battery holder (7); to unlock the
holder, press the lock in arrow direction
backwards
7 Battery holder for two 1.5 V batteries of size
AA (R6)
1.3 Fig. 5: Control part (cap removed)
8 Key SET
with the unit not locked:
for recalling and exiting the adjusting
modes for frequency/sensitivity/lock func-
→
tion
chapters 5.1, 5.2, and 5.3.1
with the unit locked:
for recalling and exiting the adjusting
mode for the lock function
9 Key
for reducing the frequency (in the fre-
quency adjusting mode) or the sensitivity (in
the sensitivity adjusting mode) and for deac-
tivating the lock function (in the lock mode)
10 Key
for increasing the frequency (in the
frequency adjusting mode) or the sensitivity
(in the sensitivity adjusting mode) and for
activating the lock mode (in the lock mode)
2 Important Notes
This unit corresponds to all relevant directives
of the EU and is therefore marked with
G
G
G
Do not put exhausted batteries / defective rechargeable
batteries into the household rubbish but take them to a
special waste disposal (e. g. collective container at your
retailer).
3 Applications
In combination with the multifrequency receiver
TXS-872 from "img Stage Line" this dynamic
hand-held microphone with integrated multifre-
quency transmitter makes up a wireless audio
transmission system. Within the UHF frequency
range of 740 – 764 MHz, the transmission fre-
quency can be selected as desired (frequency
spacing 125 kHz).
phone case, a microphone holder, and 7 plastic
push-on caps of different colours.
→
chapter 5.3.2
3.1 Conformity and Approval of the
Herewith, MONACOR INTERNATIONAL de -
clare that the unit TXS-872HT is in accordance
with the basic requirements and the other rele-
vant regulations of the directive 1999 / 5 / EC. The
declaration of conformity can be found in the
Internet via the MONACOR INTERNATIONAL
home page (www.imgstageline.com).
This unit may be operated in the following coun-
tries:
DE
In the Federal Republic of Germany, the unit
TXS-872HT requires a frequency assignment
(for which a charge is payable).
The unit is suitable for indoor use only. Pro-
tect it against dripping water and splash
water, high air humidity, and heat (admissible
ambient temperature range 0 – 40 °C).
For cleaning only use a dry, soft cloth, by no
means chemicals or water.
No guarantee claims for the unit and no lia -
bility for any resulting personal damage or
material damage will be accepted if the unit is
used for other purposes than originally intend -
ed, if it is not correctly operated or not re -
paired in an expert way.
If the unit is to be put out of operation defini -
tively, take it to a local recycling plant for a dis-
posal which is not harmful to the environment.
The microphone is supplied with a micro-
wireless microphone
GB
.
7