Cleaning And Maintenance - Bestron AAC14000WF Manual Del Usuario

7. Now select the device in the app, the buttons
at the bottom of the app work the same as the
buttons on the control panel:
A. On/off button (Power)
B. Temperature/Time down button ( - )
C. Mode button (Mode)
D. Ventilator speed button (Ventilator speed)
E. Function button (Function)
For 'Swing' mode and 'Sleep' mode
F. Temperature/Time up button (+)
G. Timer function button (Timer)
Add your family members to the app
In the app it is possible to create 'families' and then add 'members' to that family. This allows multiple users
to operate your device with the same app. This function can only be used if you have created an account
in the app.
1. Tap on 'Profile' at the bottom right of the app.
2. Then press 'Home management'.
3. Here the family "My house" is ready to be edited. Press it and enter the requested information.
4. Press 'Save' in the top right and then 'Continue'. The family has now been created.
5. Go back to the home screen and press 'Add members'. You can now invite other members of your family
to control the device via the app.
Families and members can be removed via Home management by selecting them and pressing 'Delete'.
Removing the device from the app
To remove the device from the 'Smart Life - Smart Living' app, press the device on the home screen "My
Family" for 2 seconds. Then click on 'Remove Device' and on 'Confirm'. The device has been removed from
the family.
Comment:
The 'Smart Life - Smart Living' app is not a Bestron product and Bestron therefore does not provide any
service or support for this app. Bestron is not responsible for how the app functions.
More information: www.tuya.com
CLEANING AND MAINTENANCE - General
Over time, dust can accumulate in the grids and between the fins in the appliance.
1. Switch off the appliance and unplug it.
2. Remove the dust from the grids and louvers with a hand brush and/or vacuum cleaner.
3. Clean the housing with a soft, damp cloth. Then dry it thoroughly with a dry cloth. Never immerse the
appliance in water! Make sure that no moisture gets into the electrical connections.
CLEANING AND MAINTENANCE - Water drainage
The device is equipped with an internal water collector. When it is full, the appliance stops working and the
indicator light on the control panel lights up to "FULL".
1. Switch off the appliance and unplug it.
2. Place the appliance on a platform and place a bucket or other type of container under the drainage hole
of the water collector.
B
A C
50
F
G
D E
EN
4