Overheat Safety Feature; Tip-Over Safety Feature - Comfort Glow EFH1820 Manual Del Usario

POWER / CAUTION LIGHT:
This heater is equpped with power and caution lights. The power light will illuminate when the unit is plugged in. The
caution light will illuminate when the unit overheats. When caution light is illuminated, turn off and unplug the heater.
Follow instructions below.

OVERHEAT SAFETY FEATURE:

This heater is equipped with an automatic overheat protection device. If the heater grill is obstructed, or if the heater
gets too hot for any reason, the automatic overheat device will turn the heater off. To reset the heater, simply turn off
the power and unplug the heater remove any obstructions, leave unplugged for 10 minutes until it cools completely.

TIP-OVER SAFETY FEATURE

This heater is equipped with a safety tip-over device. Once the heater is tipped over, an external switch located on the
bottom of the heater will automatically shut the heater off. Once the heater is restored to an upright position, the
heater will reset.
INSTRUCTIONS FOR POWER
This heater is for use on 120 volts only. The cord has a plug as
shown in the following figure.
WARNING: Before servicing this heater be sure to unplug
heater from wall outlet. Do not only turn off heater from
the main "ON/OFF" switch, be sure to unplug this heater.
ASSEMBLY INSTRUCTIONS
1. Remove Screw 'A' on both sides of the heater using a Phillips screwdriver.
2. Rotate base cradle to align Hole 'B' with open hole from screw 'A'.
3. Replace screw 'A' through screw hole 'B' on both sides of the heater.
4. Heater is now ready for use.
: Simple assembly is required before you use this heater.
~ 4