Intended Use; Technical Specifications - Torin BIG RED T83006 Manual Del Proprietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT
Before You Begin Register This Product.
For future reference, record the model name, model number, date of manufacture and purchase date of this
product. You can find this information on the product.
Model Name
________________________
Model Number
________________________
Date of Manufacture _______________________
Date of Purchase
________________________
OWNER / USER RESPONSIBILITY
DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.
Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all
operators are properly trained and understand how to safely and correctly operate the product. By proceeding
you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this
product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury
caused by improper use or neglect. Allow product operation only with all parts in place and operating safely.
Use only genuine replacement parts. Service and maintain the product only with authorized or approved
replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully
inspect the product on a regular basis and perform all maintenance as required. Store these instructions
in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for
any application other than that for which this product was designed. If you have any questions relative to a
particular application, DO NOT use the product until you have first contacted the distributor or manufacturer to
determine if it can or should be performed on the product.
For technical questions please call 1-888-448-6746.

INTENDED USE

This service jack has a single hydraulic pump piston that effortlessly raises the lift arm. Pump piston dust
shields and wiper seals protect the hydraulic system from contaminants. The jack features an overload valve
bypass system to prevent jack damage and user injury. Compact design allows use in confined spaces. Easily
fits under low vehicles. Meets ASME PASE safety standards.

TECHNICAL SPECIFICATIONS

Item
T83006
No adapter
S.U.V. adapter
Capacity
Lifting Range
Min. (Inch)
3 TON
5-7/8
2.5 TON
9-1/4
Lifting Range
Max. (Inch)
17-1/4
20-7/8
2
Lifting Range
Lifting Range
Min. (cm)
Max. (cm)
14.9
24
43.8
53
Tabla de contenido
loading

Tabla de contenido