Scope Of Delivery; Manufacturer; General Comments; Reading Of The Manual (Iom) - BWT Bestaqua 22 HQ Instrucciones De Montaje

1.2 Scope of delivery

The scope of supply of the RO system BWT bestaqua 22,24,26
HQ is described in the itemized points 1 to 12.
1
Fig. 1: BWT bestaqua 22,24,26 HQ - Front view of the device
Fig. 2: BWT bestaqua 22,24,26 HQ - Rear view of the device
4
2 3 5
6
7
9
10
8
12
11
The scope of delivery of the RO device includes:
Operational controller description:
OLED display (monochrome: blue)
1
Function button: ON/OFF and standby
2
Function button: Upward
3
Function button: Downward
4
Function button: Confirmation/OK
5
Status/Alarm LED (green: ready, working, flushing, pause
6
red: service, no feed water, alarm)
Connections and service components:
7 Electrical wiring with grounded PE mains plug "CEE7"
Feed water connection ¾" male thread
8
Permeate connection ¾" male thread with 3/8" female
9
10 Concentrate connection Ø 8mm JG-connection
11 Service cap for security valve of the pump
Optionally available, Item no. 824047:
12 External contacts (INPUT/OUTPUT), 3-pin, M8
for the communication between RO unit and
the external unit for external start-/stop switching (DI)
and alarm output (DO).

1.3 Manufacturer

The RO devices BWT bestaqua 22,24,26 HQ are
manufactured in the name of:
BWT water + more GmbH
Walter-Simmer-Straße 4
AT-5310 Mondsee
Phone: +43/6232/5011-0
Fax: +43/6232/4058
E-Mail: [email protected]

1.4 General comments

Following the instructions in this Installation and Operating
Manual (IOM) helps the operator to run the reverse osmosis
BWT bestaqua 22,24,26 HQ reliably and economically. This
Manual (IOM) is part of the device and must be constantly
available at the place of operation for all assigned staff
members.

1.4.1 Reading of the manual (IOM)

The staff must have read and understood this IOM prior to any
work being carried out. A basic precondition for safe working
is the adherence to all stated safety and operating instructions.
In addition, the local accident prevention provisions and the
general safety provisions effective at the place of operation are
applicable. The illustrations in these instructions serve the basic
understanding and can deviate from the actual design of the
device. Justified claims cannot be derived from the same.
EN
29