Filters; Exchanger - S&P VMC AKOR ST Manual De Instrucciones

7.1.2

Filters

n
using a flat screwdriver (4mm),
remove the clips,
q
Remove the filter holder,
Dust off the filters with a brush or vacuum cleaner.
Filters can also be cleaned in warm soapy water. Allow them to dry completely before putting them back into
the unit.
7.1.3

Exchanger

n
Note : To avoid breaking the cover, fully release the 6 fixing points before lifting the cover.
ENGLISH
o
slightly tilt the extraction face
with the filter,
r
unclip the filter holder to
release the filter,
Release the 6 attachment points as shown in the diagram above.
19 / 39 NT_51895701_AKOR ST-STGD-AN_130311.docx
p
then raise it with the filter
upwards,
s
Do the same for the fresh air
intake.