Health O Meter PRO PLUS 1100KL Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS 1100KL)
Parts List:
(1)Head Assembly
(1)Bacl Cover
(4)Front Cover
(1)Curved Pipe2# Assembly
(1)Curved Pipe1# Assembly
Tools required: Phillips head screwdriver, Allen wrenches (included).
Remove each piece from the carton and unwrap packing material carefully to prevent scratching
the unit's parts. It is recommended that assembly is performed by two people.
1. Open the scale to operational position.
2. Connect the load cell cable connector to the load cell port on the rear of the display
assembly and insert and secure the cable into the center channel in the display.
NOTE: Do not attach the Power Cord at this point.
3. Connect the load cell cable to the display unit see Figure 2.
NOTE: The load cell cable should now be secured in the channel between the display
assembly and the display support.
Figure 2
(refer to the Parts List on page 2
(1)Base Assembly
(4)Cable Cover
(1)Curved Pipe3# Assembly
(4)Adapter Bracket
(1)Adapter
(2)Foot Assemblys
2 for details on parts)