Wall Track Installation - OVE SHELBY-SP32 Manual De Instrucciones

1. Level the track (B) and mark the track holes' positions.
2. Remove the track and drill pilot holes in the marked locations with a Φ6mm (1/4in) drill bit.
3. Insert the wall anchors (FF) using a rubber mallet until the wall anchors are flush with the wall.
4. Replace and secure the track (B) with screws (EE). Do not overtighten.

WALL TRACK INSTALLATION

30mm
1 3/16in
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls
9
1
B
2
Φ 6mm
1/4in
3
FF
4
EE