EN
Electrical connection
For safe and trouble-free operation of
the appliance, the following instruc-
tions on the electrical connection must
be be observed:
Before connecting the appliance,
■
compare the connection data (volt-
age and frequency) on the rating
plate with those of your mains
power supply. This data must cor-
respond in order to avoid damage
to the appliance. If in doubt, ask
your electrical appliance retailer.
The mains socket must be protect-
■
ed by at least a 16 A fuse.
Ensure that the mains cable is
■
undamaged and is not laid over
sharp edges.
The mains cable must not be
■
pulled tightly, bent or come into
contact with hot surfaces.
Route the mains cable to prevent
■
risk of tripping.
Always unwind the mains lead
■
completely before connecting the
appliance to the plug socket.
BEEM - Elements of Lifestyle
The electrical safety of the appli-
■
ance is only assured when it is
connected to a properly installed
protective earth (PE) conductor
system. Connection to a mains
socket without PE conductor is
forbidden. If in doubt, the electri-
cal system must be checked by a
qualified electrician. The manufac-
turer assumes no liability for injury
or damage caused by a missing or
interrupted protective earth con-
ductor.
Symbols used
DANGER
This indicates an imminent hazardous
situation, which could lead to severe
physical injury or death.
►
Follow these instructions to avoid
danger.
WARNING
This indicates a possible hazardous
situation, which could lead to severe
physical injury or death.
►
Follow these instructions to avoid
danger.
ATTENTION
This indicates a potentially hazardous
situation, which could lead to minor
injuries or material damage.
►
Follow these instructions to avoid
danger.
Mr. Tea
19