Tip Selection - jbc CV-E Manual De Instrucciones

Removing the splashguard:
1. Unlock the splashguard.
Lock
More cleaning options (not supplied):
Inox Wool
Ref. CL6205
Provides a superior
cleaning of the tip.
Wiper
Tapping:
Sponge Tap gently to remove excess
Ref. S0354 solder.
The least harmful cleaning
method. Keep the sponge
damp with distilled water
when working to avoid tip
wear.
6
2. Remove it.
Metal Brush
Ref. CL6220
When used carefully, it
provides a more thorough
cleaning.
Wiping:
Use the slots to remove
remaining particles.
Changing the Tip
1. Remove the tip by using a flat-nosed pliers. Twist the tip and pull.
2. Insert the new tip and follow the same steps conversely.
Important:
Change tips only when the tool is hot.
Compatible tips
The CS and Cv desoldering stations work with C360 tip range. Find the model that best suits your
desoldering needs on www.jbctools.com
C360-001
ØA: 1
ØB: 0.8
A ø
Ømax.pin: 0.4
C360-004
ØA: 1.4
B ø
ØB: 1
Ømax.pin: 0.8

Tip selection

Remember to select the biggest tip possible for your application: Ø Inner nozzle > Ø Pin.
w w w.jbctools.com
Do not hold the tip on the spring clamp.
C360-002 C360-003
ØA: 1.2 ØA: 1.4
ØB: 0.8 ØB: 1
Ømax.pin: 0.6 Ømax.pin: 0.8
C360-007 C360-006
ØA: 1.9 ØA: 3
ØB: 1.4 ØB: 1.5
Ømax.pin: 1.2 Ømax.pin: 1.3
Ø Inner nozzle
Ø Pin
7