Paper Jam - Peach PS500-70 Manual De Instrucciones

Paper Jam

If too much paper has been inserted, a
jam may result. In such a case the red
LED "OVERLOAD"
To clear the jam, empty the waste bas-
ket first and install the basket again
5
Move the switch
position to clear the shredder of paper
that has not passed through properly.
If not all the paper can be cleared, set the
switch to the "AUTO" (forward) position
to help the remaining paper to pass
through.
This procedure may be repeated several
times until the jam is cleared.
Waste bin
The waste bin
regularly, latest if the transparent window
of the basket is covered with waste
6
paper.
Overheat
The shredder may be operated non-stop
up to 30 minutes. After a short waiting
time of 10 minutes, shredding may con-
tinue.
In case of too long continuous operation,
the device switches off and the red LED
"Overheat"
2
switch should be set to the "OFF" po-
1
sition. The shredder will start it's normal
functioning as soon as the engine has
cooled down enough.
Maintenance
It is recommended to lubricate the cutting
blade from time to time with Peach oil
paper PS100-00 or Peach Shredder oil
PS100-05. This will increase the working
life of the cutting unit.
Empty the waste bin
Set the switch
Run the oil paper (Caution: Do not open
the bag) through the shredder. Then let
the unit run backwards (switch to "REV")
for about 10 seconds.
8
PS500-70_Aktenvernichter_Content_EU.indd 8
will light up.
3
to the "REV" (rewind)
1
needs to be emptied
5
lights up. In this case the
.
5
to "AUTO".
1
Peach oil paper PS100-00 and Peach
Shredder oil PS100-05 are available from
your dealer and in various online shops.
27.01.16 16:55