Victron energy EasySolar-II 48/3000/35-32 230V MPPT 250/70 GX Manual De Instrucciones página 16

9.3 Inverter/charger
For more information regarding the configuration of the Inverter/Charger component of the EasySolar-II GX, please see
the MultiPlus-II manuals
Full programming functionality of the Inverter/charger requires use of a laptop computer with VEConfigure. Limited
configuration is possible with
9.4 SmartSolar MPPT 250/70 charge controller
The Solar Charger is configured using VictronConnect. The easiest method of connecting to the Solar Charger part is via
Bluetooth. This works for Android, iOS and macOS. It does not work for Windows.
When required to use Windows, unplug the VE.Direct cable from the Solar Charger, and use a
cable to your Windows laptop. Once completed, reconnect the VE.Direct cable that runs between the internal GX device
and the Solar Charger.
For the complete documentation for the MPPT included inside the EasySolar-II GX, please refer to these documents:
•
SmartSolar MPPT 250/70 documentation
•
VictronConnect MPPT Solar Chargers
•
VictronConnect manual
14
VictronConnect
VE.Direct USB interface