Brandt BFC7650SW Manual De Instrucciones página 35

Space required
 Choose a location that is not directly to sunlight.
 Choose a location with enough space so that the refrigerator can open easily.
 Allow a safety distance to the right (F), to the left (F), to the rear (D) and above (E) the
appliance when installing it. This allows optimising product performance, reduces your
power consumption and therefore limits your electricity bill (see diagram below).
 Make sure that air can freely circulate behind the appliance.

Note that this appliance is not designed for built-in installation.
Levelling the appliance
Choose a place to install the refrigerator on a flat surface.
Procedure for adjusting the feet at the front of the product
If the appliance is not level, the doors will not be correctly aligned and
compartment sealing will not be ensured.
To level the appliance laterally, adjust the two adjustable feet on the front of
the product.
Once the appliance is installed, ensure that it is slightly inclined rearwards. In
this way, it will be easier to close the door. If necessary, adjust the setting of
the adjustable feet.
Raise Lower