Tabla de contenido
Idiomas disponibles
Idiomas disponibles
11. Light Mode: Press this button to cycle through the available light modes:
•
Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light
mode button to freeze the lights on one color.
•
Red/White/Blue: The lights all glow red for one second, followed by white then blue.
•
Beat Sync: The lights react to the beat of the music.
•
Off: The lights turn off. This is the default mode when Wave Rider Max is first
powered on.
12. Auxiliary Input*: This stereo 1/8" (3.5 mm) input can be used to
connect a CD player, MP3 player, or other audio source.
13. USB Charge Port*: Connect your smartphone's charge cable here
to charge it. In order to charge a device, Wave Rider Max needs to
be powered on.
14. Power Cable Input*: Insert the included power cable here to
charge Wave Rider Max. Make sure Wave Rider Max and its
connections are dry before charging. Never charge when wet.
*IMPORTANT:
•
Cover the Aux In, USB port and Power Cable Input with the cap in the locked position
when using Wave Rider Max in water.
•
Make sure Wave Rider Max and its connections are dry before charging. Never charge
when wet.
•
The sealing cap also features a hole in the handle which can be used to anchor Wave
Rider Max in water. Do not use the anchor point to carry or suspend Wave Rider Max, as
this may damage the cap.
•
When using the cupholders, inserting heavy containers may cause Wave Rider Max to tip
slightly.
Operation
Pairing or Disconnecting a Bluetooth Device
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
To pair a Bluetooth device:
1.
Turn on your Bluetooth device.
2.
Power on Wave Rider Max and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is
slowly flashing.
3.
Navigate to your Bluetooth device's setup screen, find Wave Rider Max and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
To disconnect a Bluetooth device:
1.
Press and release the Bluetooth button to disconnect a paired Bluetooth device.
2.
To connect to another Bluetooth device, repeat step 3 above.
12 13 14
5
Tabla de contenido
