Table Of "Burners" Techincal Data; Disposals For Converting And Installing For Other Types Of Gas; Replacing The Main Burner Nozzle; Replacing The Pilot Burner Nozzle - Lotus BRF-94G Guia Para La Intalación E Instrucciones De Uso

Cacerolas a gas para uso profesional

Ocultar thumbs

página de 39

/ 39
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Burner 9 kW min. 3,6 kW

Burner injector 1/100 mm

Min. output adjustment 1/100 mm

Pilot Injector 1/100 mm

Consumption

Primary air h=mm

Burner 18 kW min. 7,25 kW

Burner injector 1/100 mm

Min. output adjustment 1/100 mm

Pilot Injector 1/100 mm

Consumption

Primary air h=mm

DISPOSALS FOR CONVERTING AND INSTALLING FOR OTHER TYPES OF GAS

Our appliances are tested and regulated with liquid gas /see plate).

The conversion or adaptation to another type of gas must be carried out by a specialized technician. The nozzles for the

various types of gas are supplied in a packet and are marked in hundredths of mm (see table of "burners" technical

data).

•

Remove the control panel's front securing screws (see fig. G), remove the ignition cable from the piezoelectric

lighter (fig. D)

•

With a suitable spanner, unscrew the nozzle (fig. F pos 1) and put the appropriate one in its place (see the "Burner

technical data" table).

•

The main burner needs no adjustment for the primary air.

The flame of the pilot burner has fixed air.

The only job to do is change the nozzle (fig. E pos. 2) according to the type of gas.

In this case you have to unscrew the screws as specified above and, with an appropriate spanner, unscrew the fitting and

change the nozzle (fig. E pos. 2) with a suitable one. With the right nozzle, the flame should envelope the thermocouple

(fig. E pos. 3).

Important!

Once the appliance has been converted to work with a different type of gas, the technical specification plate has to be

updated, writing on it the type of gas the appliance has been converted to.

•

The appliance contains the instructions necessary for use.

•

Check the appliances for gas leaks.

•

Examine the flame of the pilot burner; it must lap the thermocouple and be blue, otherwise examine the nozzle of

the pilot burner.

•

Check the lighting and flame of the main burner.

•

We urge the user to follow the instructions when using the appliance.

With prolonged use of the appliance, it is indispensable to carry out regular maintenance for the safe functioning of the

appliance; we therefore recommend drawing up a contract for after sales service.