Load Fail-Safe Defaults; Load Optimized Defaults; Set Password; Save & Exit Setup - Abit IP35 Manual De Usuario

In the situation when the CPU temperature detected is higher than the value of item "FanEQ
Target Temp." plus the value of item "FanEQ Temp. Tolerance", the speed ratio for the CPU fan
connected to "SYSFAN1" fan power header will first run at the speed ratio set by the item
"FanEQ Start Control", and then up to 100%.
Back to PC Health Status Setup Menu
FAN Fail Alarm Selectable
This item selects the fan that will be monitored for malfunction.
Shutdown When FAN Fail
When set to [Enabled], the system will be shut down if the fan selected for monitoring is not
running.
CPU Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature exceeds
the settings value, system will force to shutdown to protect the processor not overheat.
CPU Warning Temperature
This item lets you select the temperature at which you want the system to send out a warning
message to the PC speakers of when the temperature goes beyond either limit. You can select
the temperatures you want.
All Voltages, Fans Speed and Thermal Monitoring
These unchangeable items list the current status of the CPU and environment temperatures, fan
speeds, and system power voltage.

2.9 Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance system
operations.

2.10 Load Optimized Defaults

This option loads the BIOS default values that are factory settings for optimal-performance
system operations.

2.11 Set Password

This option protects the BIOS configuration or restricts access to the computer itself.
2.12 Save & Exit Setup
This option saves your selections and exits the BIOS setup menu.

2.13 Exit Without Saving

This option exits the BIOS setup menu without saving any changes.
2-20 IP35/IP35-E