Pnp/Pci Configurations - Abit IP35 Manual De Usuario

[Last State]: When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurred. If the system's power is off when AC
power failure occurs, it will remain off when power returns. If the system's power is on when
AC power failure occurs, the system will power-on when power returns.

2.7 PnP/PCI Configurations

Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Resources Controlled By
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the "IRQ Resources" menu.
- IRQ Resources
Click <Enter> key to enter its submenu:
This item sets each system interrupt to either [PCI Device] or [Reserved].
PCI/VGA Palette Snoop
This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.
[Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA.
[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.
IP35/IP35-E
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Auto
Press Enter
Disabled
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
2-17