1. Manuales
  2. Marcas
  3. Abit Manuales
  4. Tarjeta Madre
  5. IP35
  6. Manual de usuario

Abit IP35 Manual De Usuario

Ocultar thumbs
Tabla de contenido

Enlaces rápidos

IP35
IP35-E
Motherboard
Socket 775
User's Manual
About this Manual:
This user's manual contains all the information you may
need for setting up this motherboard. To read the user's
manual of PDF format (readable by
the "Driver & Utility CD" into the CD-ROM drive in your
system. The auto-run screen will appear, click the
"Manual" tab to enter its submenu. If not, browse the
root directory of the CD-ROM via the File Manager, and
double click the "AUTORUN" file.
Adobe
Reader), place
Intel P35 / ICH9R (IP35)
Intel P35 / ICH9 (IP35-E)
FSB 1333 MHz
Dual Channel DDR2 800
Gigabit LAN
SATA 3Gb/s with RAID (IP35)
USB 2.0 / IEEE 1394 (IP35)
7.1-Channel HD Audio
abit SoftMenu™ Tech.
abit Silent OTES™ Tech. (IP35)
Vista Premium HW Ready
Tabla de contenido
loading

Manuales relacionados para Abit IP35

Resumen de contenidos para Abit IP35

  • Página 1 Intel P35 / ICH9 (IP35-E) FSB 1333 MHz Dual Channel DDR2 800 Gigabit LAN SATA 3Gb/s with RAID (IP35) USB 2.0 / IEEE 1394 (IP35) 7.1-Channel HD Audio About this Manual: This user’s manual contains all the information you may abit SoftMenu™ Tech.
  • Página 2 IP35/IP35-E User’s Manual English + Multilingual QIG P/N: 4310-0000-92 Rev. 2.00, May 2007 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.

  • Página 3: Tabla De Contenido

    Contents 1. Hardware Setup ............... 1-1 1.1 Specifications................1-1 1.2 Motherboard Layout ..............1-2 1.2.1 IP35 ................... 1-2 1.2.2 IP35-E ................1-3 1.3 Choosing a Computer Chassis ............1-4 1.4 Installing Motherboard ..............1-4 1.5 Checking Jumper Settings............. 1-5 1.5.1 CMOS Memory Clearing Header and Backup Battery ....1-5 1.6 Connecting Chassis Components ...........
  • Página 4 4.19.2 快速安裝略說..............4-20 4.20 简体中文................. 4-21 4.20.1 规格 ................4-21 4.20.2 快速安装略说..............4-22 5. Appendix ................5-1 5.1 Troubleshooting (How to Get Technical Support?)......5-1 5.1.1 Q & A ................. 5-1 5.1.2 Technical Support Form............5-4 5.1.3 Contact Information............. 5-5 IP35/IP35-E...

  • Página 5: Hardware Setup

    • 1x Floppy Port • 1x Ultra ATA 133 IDE Connector Chipset (For IP35 • 6x SATA 3Gb/s Connectors • IP35: Intel P35 / Intel ICH9R only) • IP35-E: Intel P35 / Intel ICH9 (For IP35-E • 4x SATA 3Gb/s Connectors...

  • Página 6: Motherboard Layout

    1.2 Motherboard Layout 1.2.1 IP35 IP35/IP35-E...

  • Página 7: Ip35-E

    1.2.2 IP35-E The motherboard and its component layouts illustrated in the following ※ chapters of this manual were mainly based on model “IP35” but suitable for both “IP35” and “IP35-E”, unless specifically stated. IP35/IP35-E...

  • Página 8: Choosing A Computer Chassis

    Install the motherboard with screws and have them tightened. To prevent shorting the PCB circuit, ※ please REMOVE the metal studs or spacers if they are already fastened on the chassis base and are without mounting-holes on the motherboard to align with. IP35/IP35-E...

  • Página 9: Checking Jumper Settings

    For incorrect CPU ratio/clock settings in the BIOS, press <Del> key to enter the BIOS setup menu right after powering on system. Set the CPU operating speed back to its default or an appropriate value. Save and exit the BIOS setup menu. IP35/IP35-E...
  • Página 10 Enter the BIOS setup menu. Reconfigure the setup parameters if necessary. CAUTION: Danger of explosion may arise if the battery is incorrectly renewed. ※ Renew only with the same or equivalent type recommended by the battery ※ manufacturer. Dispose of used batteries according to the battery manufacturer’s instructions. ※ IP35/IP35-E...

  • Página 11: Connecting Chassis Components

    EPS12V power source to meet the 240VA Plugged from a 4-pin Plugged from an 8-pin protection limits. ATX12V power. EPS12V power. [ATX4P1]: Auxiliary 12V power connector This connector provides an auxiliary power source for devices added on PCI Express slots. IP35/IP35-E...

  • Página 12: Front Panel Switches & Indicators Headers

    Please refer to the BIOS setup route: “PC Health Status” “ABIT FanEQ Control” “CPU FAN Type” to select the one of your own. These fan connectors are not jumpers. DO NOT place jumper caps on these ※ connectors. IP35/IP35-E...

  • Página 13: Installing Hardware

    2. Use your right-thumb to raise the load plate. Lift it up to fully open position. 4. Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package. IP35/IP35-E...
  • Página 14 7. Secure the lever with the hook under retention tab. A higher fan speed will be helpful for better airflow and heat-dissipation. ※ Nevertheless, stay alert to not touch any heatsink since a high temperature generated by the working system is still possible. 1-10 IP35/IP35-E...

  • Página 15: Ddr2 Memory Slots

    DIMM module. Static electricity can damage the electronic components of the computer or ※ optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. IP35/IP35-E 1-11...

  • Página 16: Connecting Peripheral Devices

    Make sure to configure the “Master” and “Slave” relation before connecting ※ two drives by one single ribbon cable. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. 1-12 IP35/IP35-E...

  • Página 17: Serial Ata Connectors

    1.8.2 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by SATA cable. Both SATA3 and SATA4 connectors are available for IP35 only. ※ To connect SATA device: Attach either end of the signal cable to the SATA connector on motherboard.

  • Página 18: Additional Usb 2.0 Port Headers

    ※ 1.8.4 Additional IEEE 1394 Port Header Each header supports 1x additional IEEE 1394 port by connecting bracket or cable to the rear (For IP35 only) I/O panel or the front-mounted IEEE 1394 port of your chassis. Pin Assignment Pin Assignment...

  • Página 19: Internal Audio Connectors

    Pin 4 “AVCC” of this header. Pin Assignment Pin Assignment (HD AUDIO) (AC’97 AUDIO) MIC2 L MIC In AGND MIC2 R MIC Power AVCC FRO-R Line Out (R) MIC2_JD F_IO_SEN FRO-L Line Out (L) LINE2_JD IP35/IP35-E 1-15...
  • Página 20 The audio driver is originally configured to support HD Audio. For AC’97 audio connection, you may: Right-click the “Realtek HD Audio Manager” icon system tray. Click “Audio I/O” tab, and then click “Connector Settings”. Click “Disabled front panel jack detection”, and then click “OK” to confirm. 1-16 IP35/IP35-E...

  • Página 21: S/Pdif Output Connection Header

    S/PDIF Out Ground 1.8.8 PCI and PCI Express X16, X1 Slots Install PCI Express X16 graphics card into slot “PCIEXP1”. Install PCI Express X1 cards into slots “PCIE1” and/or “PCIE2”. Install PCI cards into slots “PCI1”, “PCI2”, and/or “PCI3”. IP35/IP35-E 1-17...

  • Página 22: Onboard Indicators

    1.9 Onboard Indicators • 5VSB: This LED lights up when the power supply is connected with power source. • VCC: This LED lights up when the system power is on. 1-18 IP35/IP35-E...

  • Página 23: Connecting Rear Panel I/O Devices

    Line-In: Connects to the line out from external audio sources. Line-Out: Connects to the front left and front right channel. Mic-In: Connects to the plug from external microphone. (For IP35 only) • IEEE 1394: Connects to devices of IEEE 1394 protocol.
  • Página 24 1-20 IP35/IP35-E...

  • Página 25: Bios Setup

    In order to increase system stability and performance, our engineering staff is ※ constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen. IP35/IP35-E...

  • Página 26: Softmenu Setup

    External Clock This item selects the external clock frequency. Due to the specification limit of the CPU you installed, the speed you set over its standard bus speed is supported, but not guaranteed. IP35/IP35-E...
  • Página 27 ICH 1.50V Voltage This item selects the voltage for ICH (SB). MCH 1.25V Voltage This item selects the voltage for MCH (NB). CPU GTLREF This item selects the percentage ratio of CPU VTT voltage for the CPU GTL reference voltage. IP35/IP35-E...

  • Página 28: Standard Cmos Features

    SATA Channel 1 Auto-Detection Press Enter Item Help SATA Channel 1 Auto Access Mode Auto Capacity 0 MB Cylinder Head Precomp Landing Zone Sector :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults IP35/IP35-E...
  • Página 29 If you want to define your own drive yourself, set it to [Manual] and make sure you fully understand the meaning of the parameters. Please refer to the instruction manual provided by the device’s manufacturer to get the setting right. Both SATA3 and SATA4 connectors are available for model “IP35” only. ※ Access Mode This item selects the mode to access your SATA devices.

  • Página 30: Advanced Bios Features

    Quick Power On Self Test When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on the system. The BIOS shorten or skip some check during the POST. IP35/IP35-E...
  • Página 31 This item appears only for certain processors with the EIST (Enhanced Intel SpeedStep Technology) Function. When set to [Enabled], EIST will dynamically switch between multiple frequency and voltage points to optimize the power and performance balance of the processor and system based on demand. IP35/IP35-E...
  • Página 32 Delay IDE Initial (Secs) This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A larger value will give more delay time to the device for which to initialize and to prepare for activation. IP35/IP35-E...

  • Página 33: Advanced Chipset Features

    SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks. The following items will be available to make adjustments by selecting option [Manual]. IP35/IP35-E...
  • Página 34 This item selects the mode for PCI Express add-on card. Back to Advanced Chipset Features Setup Menu Init Display First This item allows you to choose the primary display card. PEG Force X1 When set to [Enabled], this item forces the PEG port down to x1 mode. 2-10 IP35/IP35-E...

  • Página 35: Integrated Peripherals

    This option enables or disables the bus mastering capability under the DOS environment. OnChip SATA Controller This item enables or disables the onchip SATA controller. (For model “IP35” only) OnChip SATA Mode This item selects the mode for devices connected through SATA ports.
  • Página 36 - USB Keyboard Support Via - USB Mouse Support Via - USB Storage Function Enabled *** USB Mass Storage Device Boot Setting *** :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 2-12 IP35/IP35-E...
  • Página 37 :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults (For model “IP35” only) IEEE 1394 Controller This option enables or disables the IEEE 1394 controller. IDE Controller This option enables or disables the function over IDE connector.
  • Página 38 Phoenix – AwardBIOS CMOS Setup Utility Super-IO Device Floppy Disk Controller Enabled Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Floppy Disk Controller This option enables or disables the floppy disk controller. 2-14 IP35/IP35-E...

  • Página 39: Power Management Setup

    When set to [Enabled], access through the onboard LAN port can remotely wake up the system that was in Soft-Off condition. Wake Up by Alarm When set to [Enabled], you can set the date and time you would like the Soft-Off PC to IP35/IP35-E 2-15...
  • Página 40 [Power Off]: When power returns after an AC power failure, the system’s power remains off. You must press the Power button to power-on the system. [Power On]: When power returns after an AC power failure, the system’s power will be powered on automatically. 2-16 IP35/IP35-E...

  • Página 41: Pnp/Pci Configurations

    This item sets each system interrupt to either [PCI Device] or [Reserved]. PCI/VGA Palette Snoop This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not. [Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA. [Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA. IP35/IP35-E 2-17...

  • Página 42: Pc Health Status

    2.8 PC Health Status Phoenix – AwardBIOS CMOS Setup Utility PC Health Status ► ABIT FanEQ Control Press Enter Item Help FAN Fail Alarm Selectable CPU FAN Shutdown When FAN Fail Disabled CPU Shutdown Temperature 90 ° C/194 ° F CPU Warning Temperature 80 °...
  • Página 43 This item sets the lowest speed ratio for the CPU fan connected to “SYSFAN1” fan power header to run at when the CPU temperature detected is lower than the value of item “FanEQ Target Temp.” plus the value of item “FanEQ Temp. Tolerance”. IP35/IP35-E 2-19...

  • Página 44: Load Fail-Safe Defaults

    This option protects the BIOS configuration or restricts access to the computer itself. 2.12 Save & Exit Setup This option saves your selections and exits the BIOS setup menu. 2.13 Exit Without Saving This option exits the BIOS setup menu without saving any changes. 2-20 IP35/IP35-E...

  • Página 45: Driver & Utility

    • [Utility]: Click to enter the utilities installation menu. • [abit Utility]: Click to enter the installation menu of utilities exclusively developed by abit. • Browse CD]: Click to browse the contents of this “Driver-&-Utility CD”. • Close]: Click to exit this installation menu.

  • Página 46: Intel Chipset Software Installation Utility

    The path to enable the RAID function in the BIOS setup menu is: Integrated Peripherals OnChip IDE Device SATA Mode Select “RAID”. Both SATA3 and SATA4 connectors are available for IP35 only. ※ To install this program: Click on the [Drivers] tab in the installation menu screen.

  • Página 47: Audio Driver

    Sound Manager icon located at the desktop shortcut. Click item “Sound Manager”. The Realtek HD Audio Manager appears. Click the [Audio I/O] tab. Click the pull down menu to select the channel configuration. Click [OK] button to apply the Audio I/O settings and exit. IP35/IP35-E...

  • Página 48: Lan Driver

    Follow the prompts on the screen to complete installation. 3.6 USB 2.0 Driver There is no need to install this driver for Windows 2000 with Service Pack 4, ※ Windows XP with Service Pack 1, or their later version. IP35/IP35-E...

  • Página 49: Abiteq

    The abitEQ is a self-diagnostic system that protects PC Hardware by monitoring critical items of Power Supply Voltage, CPU & System Fans Speed, and CPU & System Temperature. To install this utility: Click on the [abit Utility] tab in the installation menu screen. Click the [abitEQ] item. The following screen appears.

  • Página 50: Flashmenu (Bios Update Utility)

    3.8 FlashMenu (BIOS Update Utility) The FlashMenu is a utility to flash the BIOS in a more easily and quickly way. To install this utility: Click on the [abit Utility] tab in the installation menu screen. Click the [FlashMenu] item. The following screen appears.

  • Página 51: Sata Raid Driver (For Windows Vista)

    Save this selection and exit BIOS setup menu by accessing the BIOS menu “Save & Exit Setup”. Restart the system. The system will now boot from CD, and enter the ABIT Boot Manager, the following options appear (0) Boot From First HDD...
  • Página 52 IP35/IP35-E...

  • Página 53: Multilingual Quick Installation Guide

    • [SLED]: Connecte au câble de la DEL de veille. l’installation de votre carte mère abit. Pour des opérations plus • [PWR]: Connecte au câble de l’interrupteur de l’alimentation avancées, vous devez vous reporter à la version complète.

  • Página 54: Deutsch//Kurze Installationsanleitung

    Diese “Kurze Installationsanleitung” enthält nur die Anschlüsse auf der Vorderseite: [FPIO1] grundlegenden Hardwareinformationen, die Sie zur [HLED]: Kabelanschluss für Festplattenzugriffsanzeige. • Installation Ihres abit-Motherboards benötigen. Details [RST]: Kabelanschluss für Rücksetzschalter. • finden Sie im ausführlichen Handbuch. [SPKR]: Kabelanschluss für Kabelanschluss für •...

  • Página 55: Italiano//Guida All'installazione Rapida

    • [PLED]: collega al cavo LED alimentazione. le informazioni di base sull’hardware necessarie all’installazione della scheda madre abit. Fare riferimento Collettore porta USB aggiuntiva: [FP-USB1], [FP-USB2] alla versione completa della guida per eseguire le Collettore porta IEEE 1394 aggiuntiva: [FP-1394-1], [FP-1394-2] operazioni avanzate.

  • Página 56: Español//Guía Rápida De Instalación

    [PWR]: Conecte el cable del interruptor de encendido. • durante la instalación de la placa base abit. Para conocer el [PLED]: Conecte el cable del LED de encendido. • funcionamiento avanzado, es necesario consultar la Terminal de puerto USB adicional: [FP-USB1], [FP-USB2] versión completa.

  • Página 57: Português//Guia De Instalação Rápida

    à • [PWR]: Faz a ligação ao cabo do botão de alimentação. instalação da sua placa principal abit. Para mais • [PLED]: Faz a ligação ao cabo do LED do botão de alimentação.

  • Página 58: Русский//Краткое Руководство По Установке

    основная информация о техническом обеспечении, которая • [PLED]: Соединяется с кабелем индикатора питания. вам может понадобиться при установке материнской платы abit. Описание дополнительных операций вы найдете в Дополнительная насадка порта USB: [FP-USB1], [FP-USB2] полной версии руководства. Дополнительная насадка порта IEEE 1394: [FP-1394-1], [FP-1394-2] Предостережения...

  • Página 59: Eesti//Kiirpaigaldusjuhend

    4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaigaldusjuhend” sisaldab ainult [SLED]: Ühendage peatusindikaatori (Suspend LED) • abit-emaplaadi paigaldamiseks vajalikku riistvaraalast kaabliga. põhiteavet. Edasijõudnud kasutamiseks tuleb teil ikkagi [PWR]: Ühendage toitelüliti kaabliga. • pöörduda täisversiooni poole. [PLED]: Ühendage toiteindikaatori (Power LED) kaabliga. • Täiendav USB-pordi päis: [FP-USB1], [FP-USB2] Ettevaatusabinõud riistvara paigaldamisel...

  • Página 60: Latviski//Ātrās Instalēšanas Instrukcija

    4.8 Latviski//Ātrās instalēšanas instrukcija Šī “Ātrās instalēšanas instrukcija” ietver tikai pamata [RST]: Pievieno atiestates slēdža kabeli. • norādes iekārtai, kas nepieciešamas, instalējot abit [SPKR]: Pievieno sistēmas skaļruņa kabeli. • mātesplati. Pilnīgākai darbībai nepieciešams iegūt [SLED]: Pievieno LED pārtraukšanas kabeli. •...

  • Página 61: Lietuvių//Trumpas Instaliavimo Vadovas

    [SLED]: Sujunkite su darbo pristabdymo indikatoriaus • informacija apie techninę įrangą, kurios jums gali prireikti kabeliu. instaliuojant pagrindinę plokštę abit. Papildomų operacijų [PWR]: Sujunkite su maitinimo tinklo jungiklio kabeliu. • aprašymą rasite pilnoje vadovo versijoje. [PLED]: Sujunkite su maitinimo indikatoriaus kabeliu.

  • Página 62: Polski//Instrukcja Szybkiej Instalacji

    [SLED]: Podłączenie kabla diody LED wstrzymania pracy. • podstawowe informacje dotyczące sprzętu, wymagane [PWR]: Podłączenie kabla przełącznika zasilania. • podczas instalacji płyty głównej abit. Przy [PLED]: Podłączenie kabla diody LED zasilania. • zaawansowanych operacjach, niezbędne będzie skorzystanie z kompletnej wersji instrukcji.

  • Página 63: Magyar//Gyorstelepítési Útmutató

    4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmutató” csak azt az alapvető [PWR]: Csatlakoztassa a tápkapcsoló kábelhez. • hardver információt tartalmazza, amely az abit alaplap [PLED]: Csatlakoztasson a táp LED kábelhez • telepítéséhez szükséges. Az előrehaladott üzemeltetéshez, Kiegészítő USB port fejrész: [FP-USB1], [FP-USB2] továbbra is a teljes útmutatót kell használnia.

  • Página 64: Türkçe//Hızlı Kurulum Kılavuzu

    4.12 Türkçe//Hızlı Kurulum Kılavuzu Bu “Hızlı Kurulum Kılavuzu”, abit anakartınızı takmanızda Ön Panel Konnektörleri: [FPIO1] gerekebilecek sadece temel donanım bilgisini içermektedir. [HLED]: Sabit Disk Sürücü LED kablosuna bağlayın. • İleri işlemler için daha geniş olan tam versiyonuna [RST]: Sıfırlama Anahtarı kablosuna bağlayın.
  • Página 65 ‫دﻟﻴﻞ اﻟﺘﺮآﻴﺐ اﻟﺴﺮﻳﻊ‬ ‫اﻟﻠﻐﺔ اﻟﻌﺮﺑﻴﺔ‬ 4.13 IP35/IP35-E 4-13...
  • Página 66 ‫راهﻨﻤﺎﯼ ﻧﺼﺐ ﺳﺮﻳﻊ‬ ‫ﻓﺎرﺳﯽ‬ 4.14 4-14 IP35/IP35-E...

  • Página 67: 日本語//クイックインストールガイド

    4.15 日本語//クイックインストールガイド • この「クイックインストールガイド」には、abit マ [SPKR]: システムスピーカーケーブルに接続 • [SLED]: サスペンド LED ケーブルに接続 ザーボードを取り付けるときに必要となるハードウ • [PWR]: 電源スイッチケーブルに接続 ェアの基本情報のみが含まれています。詳細な操作 • [PLED]: 電源 LED ケーブルに接続 については、その完全版を参照してください。 ハードウェアのセットアップに関する注意事項 追加 USB ポートヘッダ: [FP-USB1]、[FP-USB2] • ボードを取り付けたり設定を変更するときは、 事前に 追加 IEEE 1394 ポートヘッダ: [FP-1394-1]、[FP-1394-2] 電源装置をオフにし、AC コンセントからプラグを必 ず抜いてください。 前面パネルオーディオ接続ヘッダ: [FP-AUDIO1] •...

  • Página 68: 한국어//빠른 설치 가이드

    4.16 한국어//빠른 설치 가이드 본 “빠른 설치 가이드”는 빅빔 abit 메인보드 • [SPKR]: 시스템 스피커 케이블에 연결하세요. [SLED]: 유휴(Suspend) LED 케이블에 연결하세요. • 설치에 필요한 중요한 하드웨어 정보만을 • [PWR]: 전원 스위치 케이블에 연결하세요. 포함하고 있습니다. 보다 상세한 정보 및 과정은...

  • Página 69: Bahasa Malaysia//Panduan Pemasangan Ringkas

    • maklumat perkakasan asas yang anda mungkin perlu [SPKR]: Sambungkan ke kabel Sistem Pembesar Suara. • semasa memasang papan induk abit anda. Untuk [SLED]: Sambungkan ke kabel Gantung LED. • pengendalian lanjutan, anda perlu rujuk ke versi [PWR]: Sambungkan ke kabel Suis Kuasa.

  • Página 70: ไทย//คู ่ ม ื อ การติ ด ตั ้ ง อย่ า งย่ อ

    เป็ น เพี ย งข้ อ มู ล พื ้ น ฐานที ่ จ ำเป็ น ใน [SPKR]:ต่ อ เข้ า กั บ สายลำโพงของระบบ • การติ ด ตั ้ ง แผงวงจรหลั ก abit ของคุ ณ เท่ า นั ้ น กรุ ณ า [SLED]:ต่ อ เข้ า กั บ สาย LED •...

  • Página 71: 繁體中文

    • 1 個 IEEE 1394 接頭 • HDMI 音源接頭 • 4 個 USB 2.0 接頭 • 1 個 RJ-45 Gigabit 網路接頭 Serial ATA • IP35: Intel ICH9R 晶片組提供 6 組 SATA abit Engineered 3Gb/s 接頭支援 Intel 矩陣儲存科技 （AHCI ™ • abit SoftMenu 技術...

  • Página 72: 快速安裝略說

    4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 附加的 USB 連接埠接頭：[FP-USB1]、[FP-USB2] 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 除了位於 I/O 面板上的內建 USB 接頭外 ， 您可透過帶有 手冊版本。 支架的延長線，連接這些各有兩個附加 USB 連接埠的 接頭。 硬體安裝注意事項 附加的 IEEE 1394 連接埠接頭：[FP-1394-1]、[FP-1394-2] • 安裝機板或變換任何設定之前，請先關閉電源並拔 除了位於 I/O 面板上的內建 IEEE 1394 接頭外，您可透 掉電源插頭。 過帶有支架的延長線，連接這些各有一個附加 IEEE • 從抗靜電袋中取出機板前，請先戴上靜電安全手 1394 連接埠的接頭。...

  • Página 73: 简体中文

    • 1 个 Ultra ATA 133 IDE 接头 芯片组 （只用于 IP35） • 6 个 SATA 3Gb/s 接头 • IP35: Intel P35 / Intel ICH9R （只用于 IP35-E） • 4 个 SATA 3Gb/s 接头 • IP35-E: Intel P35 / Intel ICH9 • 4 个 USB 2.0 接头...

  • Página 74: 快速安装略说

    4.20.2 快速安装略说 [PLED]：连接电源 LED 电缆。 本“快速安装略说”仅包含基本的硬件信息，供您在 • 安装 abit 主板时进行参考。如需了解高级操作，仍请 附加的 USB 端口接头：[FP-USB1]、[FP-USB2] 参阅其完整的手册版本。 除了位于 I/O 面板上的板载 USB 连接器外 ， 这些接头可 以通过带线卡的延长电缆分别提供两个附加的 USB 端 硬件设置注意事项 口连接。 • 在安装主板或更改任何设置前，务必关闭电源并从 附加的 IEEE 1394 端口接头：[FP-1394-1]、[FP-1394-2] 交流插座上拔掉电源线。 除了位于 I/O 面板上的板载 IEEE 1394 连接器外，这些 •...

  • Página 75: Appendix

    If the situation remains the same, try Step 3. Step 3. The same procedure as Step 2, but while discharging the CMOS data, pull out the ATX power connectors from motherboard and remove the button battery during CMOS discharge. IP35/IP35-E...
  • Página 76 Example: Intel 650 3.4GHz (OC FSB=220MHz) • Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) • Memory size: Type in the size of your memory module. Example: 512M* 4PCS IP35/IP35-E...
  • Página 77 See the next page for a blank Technical Support Form, or visit our website to fill in the form on line (http://www.abit.com.tw/page/en/contact/technical.php). Q. Is the motherboard dead? Do I need to return it to where I bought from or go...

  • Página 78: Technical Support Form

    5.1.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: IP35/IP35-E...

  • Página 79: Contact Information

    Universal ABIT (USA) Corporation 2901 Bayview Drive, Shanghai Fremont, CA 94538, U.S.A. Tel: 1-510-623-0500 Universal ABIT (Shanghai) Co. Ltd. Fax: 1-510-623-1092 FL 19 Xuhui Yuan BLOG NO.1089 Website: http://www.abit-usa.com ZhongShan s 2 RD, ShangHai 200030 The People's Republic of China Latin America: r [email protected]...
  • Página 80 P/N: 4310-0000-92 Rev. 2.00...

Este manual también es adecuado para:

Ip35-e

Tabla de contenido