Hex Wrench Storage - Makita DHS680 Manual De Instrucciones

2
3
015108
To remove the blade, press the shaft lock so that the
blade cannot revolve and use the wrench to loosen the
hex bolt clockwise. Then remove the hex bolt, outer
flange and blade.
1
2
015109
To install the blade, follow the removal procedure in
reverse. BE SURE TO TIGHTEN THE HEX BOLT
COUNTERCLOCKWISE SECURELY.
When changing blade, make sure to also clean the
upper and lower blade guards of accumulated sawdust
as discussed in the Maintenance section. Such efforts
do not replace the need to check lower guard operation
before each use.
1 2
3
011231
Mount the inner flange with its recessed side facing
outward onto the mounting shaft and then place saw
blade, outer flange and hex bolt.
BE SURE TO TIGHTEN
COUNTERCLOCKWISE SECURELY.
1. Hex wrench
2. Shaft lock
3. Tighten
4. Loosen
4
1
1. Inner flange
2. Saw blade
3. Outer flange
4. Hex bolt
3
4
1. Mounting shaft
5
2. Inner flange
3. Saw blade
4. Outer flange
5. Hex bolt
4
THE HEX

Hex wrench storage

1
015110
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
Connecting a vacuum cleaner
(Optional accessory in some countries)
015195
2
015112
When you wish to perform clean cutting operation,
connect a Makita vacuum cleaner to your tool.
Install the dust nozzle on the tool using the screw. Then
connect a hose of the vacuum cleaner to the dust
nozzle as shown in the figure.
For tool without dust nozzle provided as a standard
equipment, replace the lever fixed on the lower guard to
the one supplied with the dust nozzle (optional accessory)
at the same time when installing the dust nozzle.
Otherwise you will not be able to make a cut because the
BOLT
lower guard movement is hindered by the dust nozzle.
OPERATION
CAUTION:
Be sure to move the tool forward in a straight line
•
gently. Forcing or twisting the tool will result in
overheating the motor and dangerous kickback,
possibly causing severe injury.
11
1. Hex wrench
1. Dust nozzle
2. Screw
3. Lever
1
2
3
1. Vacuum cleaner
2. Hose
1