Adjusting The Stapling Heads - KRUG+PRIESTER IDEAL 8590 Instrucciones De Uso

Plegadora grapadora
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65

Adjusting the stapling heads

The device has two stapling heads that can be attached at spacings of 90, 135 and 180 mm.
Switch off the device at the power switch. Disconnect the mains plug.
Open the bottom cover. Attach the stapling heads (secured with a wing bolt) at the positions you
require:
90 mm
For corner stapling, you have to remove the head that will not be used:
36
135 mm
To do this, start by disconnecting the sensor
plug from the stapling head.
Insert the sensor plug into the dummy socket
for storage.
Unscrew the wing bolt and remove the stapling
head.
180 mm
Tabla de contenido
loading

Tabla de contenido