Daga CP-400 Instrucciones De Uso página 12

INSTRUCTIONS FOR USE
Prior to turning on the device, remove the protective cover (D) and
set the desired trimming brush (E), taking it by the sides (fig.1) and
adjusting the lower section of the blade. We recommend starting off
by selecting the longest one 12mm, then changing to the smaller
ones 9, 6 or 3mm until you achieve the desired length.
In order to remove the cutting brush, pull upwards (fig. 2.)
Connect the product to the appropriate mains.
Turn on the product by selecting the on switch and placing it in the
I (B) position.
Select the 0(B) on switch in order to turn off the product before you
disconnect the device from the mains.
HOW CUT THE AIR:
Fig.1
Fig.2
12