Operation; Setting Up The Scale; Moving The Scale; Aligning The Scale - Seca 644 Manual De Instrucciones Y Garantía

5. OPERATION

5.1 Setting up the scale

Moving the scale

Aligning the scale

88 •
CAUTION!
Bodily injury
Perform a function check as described in the
section entitled "Function check" on page 109
before using the device each time.
1. Tilt the device until it can move freely on the
casters.
2. Keep the device in this position and move it to the
desired set-up or storage location.
ATTENTION!
Incorrect measurement due to force shunts
If the scale and housing is in contact with some-
thing, e.g. a towel, weight will not be measured
correctly.
► Set the scale up so that only its foot screws
are in contact with the floor.
1. Place the scale on firm, level surface.