Charging The Battery; Using A Micro Sd/Sdhc Card; Transfer Of Data Between Device And Computer - Intenso TAB 714 Manual Del Usuario

5.) Charging the battery

Please charge the battery completely before first use of the device. Connect the included power
adapter to the device and a power outlet. The full charge takes approximately 5 hours.
The charge condition will be displayed you during operation. In case of an active display lock, the actual
charge condition will be displayed you in percentage.
If the equipment is switched off, if you press shortly a key in any order a battery symbol will be shown on the
display. During the charge process by an animation the filling of the battery will be displayed in many levels.
If the battery is fully loaded, the animation will stop and the battery will be displayed completely.
Notes
a. With 15% remaining residual power of the battery you will get a warning message on the display. To recharge the battery, you
should now connect the device using the AC adapter to an electrical outlet to avoid possible data loss and increase the battery life.
b. You can use the device while charging the battery. To ensure long-lasting battery life, we ask you not to use the device.
c. To ensure good performance, the built-in battery must be used frequently. If you use the device often, please charge the battery
fully at least once a month.
d. Make sure you use only the included AC adapter for charging.

6.) Using a Micro SD/SDHC Card

This device is able to read data directly from a Micro SD/SDHC memory card.
In order to use a Micro SD/SDHC memory card, slide the card into the opening provided at the bottom of
the device (I). Use the pre-installed Explorer (more information is to be found in the extensive
operating instructions), to be able to access the data provided on the memory card. For this, please
select the "SD Card" in the index of the Explorer.

7.) Transfer of Data between Device and Computer

1.) Connect the device using the included USB cable to a computer.
2.) On the device the screen for the USB connection is now displayed. Tap briefly "Turn on USB
Storage". The device is recognized as a removable disk and you get the info "USB memory in use".
After briefly tapping the home button you can continue to use your device normally. You have now
have access to the internal memory of the device from your computer and can copy, delete or
transfer files to your device.
3.) If an USB connection with the computer exists, the USB icon is displayed in the status bar. You can get
additional information in the extended status bar (click on the clock in the status bar to open it) and you
can activate or deactivate the USB connection.
EN - 5