Num'axes PIE 1009 Manual De Instrucciones página 18

5.3.1.
Put the power switch in the TEST position then press MENU to enter into the setting menu. In
the setting menu, you can check and change the settings of the camera.
5.3.1.1. Changing parameter settings in TEST mode
A wide range of options or parameters are provided to allow you to set the camera to your
operational preferences. To change the setting of any parameter you must first switch to the
TEST mode. Once in TEST mode, pressing the MENU button will allow you to access any
parameter and change its setting. The name of the parameter and its current setting will be
shown on the LCD screen.
Pressing the  or  key scrolls to the next or previous parameter ( key to move on to the next
parameter and  key to go back to the previous parameter), and pressing the  or  key
scrolls to the next or previous setting for a parameter ( key to move on to the next setting and
 key to move back to the previous setting).
When you are finished changing the settings of one or more parameters, press the MENU
button again to exit the TEST mode and save all of the settings you changed.
NOTE: If you do not press the MENU button when you have finished changing the settings of
one or more parameters, the camera will not save your settings.
After setting the parameters to your preferences, be sure to move the switch to ON to begin
actually taking photos or videos. No images will be captured if the switch is left in the TEST
position (unless you press the OK key after exiting the menu).
5.3.1.2. Examples - Changing the settings of some common parameters
To change any parameter's setting, always start with the power switch in the TEST position.
After the LCD screen comes on, press the MENU key. First, you will see "Select language" and
"Camera settings" on the LCD screen and "Select language" is highlighted.
 Press OK to enter the "Choisir la langue/Select language" interface, then press  or  to
select the language you want to use. Press OK to save the setting and exit.
Choisir la langue
Réglages de l'appareil
 Press  to highlight "Camera settings" and press OK to enter. The first parameter you will
see is "Mode". To change it from its default setting of "Camera" (still photos) to "Video"
(shoot video clips), press the  key to select "Video".
Mode
Camera
Photo resolution
5M
Video resolution
720P
Images in series
1 photo
PIE1009 – indice B – Février 2019
Custom settings
English
Français
Deutsch
Italiano
Mode
Video
Photo resolution
5M
Video resolution
720P
Images in series
1 photo
18/60