Craftmade WB242 Manual De Instalación página 7

Ocultar thumbs Ver también para WB242:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Electrical Connections Continued...
Ground
White
Black
Fan
Switch
Light
Switch
Blue
Figure C
Common Problems
Problem A: Fan Will not Start
Remedies:
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies:
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
Problem C: Fan Wobbles
Remedies:
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to
prevent fan from wobbling.
4. A balancing kit is enclosed if needed.
Weight:
The weight of the complete fan, including assembly hardware is:
UL MODEL
PRODUCT MODEL
FC-TO52
WB450
FC-TO52
WB348
Black
Black
Green
White
Optional
Light
WEIGHT (LBS/KG)
17.2 / 7.8
17.2 / 7.8
WarPlanes
WB242 / WB348TS / WB448GG
BETTER BY DESIGN
Tabla de contenido
loading

Este manual también es adecuado para:

Wb348tsWb448gg

Tabla de contenido