Craftmade WB242 Manual De Instalación página 4

5
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S5) are provided for
your convenience. If an additional blue wire is present then also connect
the blue wire to the black wire. (Optional light kit may be wired to
individual wall switches, if desired.)
2. After connections are made, turn splices upward and push carefully
into outlet box. Separate blue and black wires on one side of the box, and
white and green wires on the other side.
There are 3 colored wires coming from the top of the motor (including
ground wire).
NOTE: Wire connectors that are not pushed up into the outlet box may in time sag and
rub against the top of the motor housing. This sound can be mistaken for bearing noise.
Ground
White (Neutral)
Black (Power)
White
Black
Blue
Wire Connnections
Outlet Box Fan wires
Black Black
(Hot wire for fan)
Green Green
(Ground wire)
White White
(Neutral wire)
Black Blue
(Light kit wire)
Step 5
Wire Connectors (S5)
Ground (Green)
6
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J"
hook. Tighten zip tie securely.
"J" Hook (S7)
Zip Tie (S8)
Safety Cable
NOTE: Parts furnished will allow
you to install your fan at up to a
35° angle. Angles greater than 35°
will require a 45° angle adapter (see
dealer). NOTE: J Hook
installation is a Canadian
requirement only.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
Step 6
"J" Hook (S7)