Tabla de contenido
Idiomas disponibles
Idiomas disponibles
11. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Locate ON/OFF slider
switch on wall control and set to the ON
position. Test light and dimmer function and
then test fan speeds. Next, locate remote control
transmitter. Test fan speeds with the different
fan speed buttons
I
the light ON/OFF function with the
the remote control. Test dimmer function by
holding down the
2 seconds. If the wall/remote control operates all
of the functions of the fan and light, battery has
been installed correctly. If fan and/or light do
(does) not function, please refer to
"Troubleshooting" section to solve any issues.
Fan must be on LOW before setting the fan to
reverse direction. Use
air depending on the season. A ceiling fan will
allow you to raise your thermostat setting in
summer and lower your thermostat setting in
winter without feeling a difference in your
comfort.
IMPORTANT: Remote and wall controls must be
synchronized with fan in order to function
properly.
-
on remote control. Test
VI
button on
button for more than
button to recirculate
wall control
III IV
II
V
I
VI
OFF
ON
page 10
remote control
transmitter
III
IV
II
V
I
VI
Capítulos
Tabla de contenido
