Craftmade SON52 Guia De Instalacion página 9

9. Light Kit Assembly (Optional). (cont.)
Connect female plug from motor housing to
male plug from LED light kit, matching up the
colors on the male plug with the colors on the
female plug for correct fit. Be sure that plugs
connect securely. [NOTE: If you will NOT be
using the light kit, do NOT connect the plugs.]
Carefully arrange wiring within fitter plate.
Remove 1 screw from underside of fitter plate
and partially loosen the other 2 screws. Align
slotted holes in LED light kit with loosened
screws in fitter plate. Twist LED light kit to lock.
Re-insert screw that was previously removed
and tighten all 3 screws securely.
To attach glass shade, align grooves on glass
shade with nodules on inside of LED light kit.
Push up gently on glass shade and then turn
glass shade to the RIGHT (clockwise) until it no
longer turns.
NOTE: Pull down VERY GENTLY on glass shade to
make sure that glass shade is secure.
If you do NOT wish to use the light kit,
grooves in metal cover with nodules inside LED
light kit. Push up on metal cover and then turn
metal cover to the RIGHT (clockwise)
longer turns.
fitter plate
align
until it no
LED light kit
page 8
motor housing
female plug
male
plug
LED light kit
glass shade
metal cover