Technical Data - ANSMANN 20.8 Manual

> CHARGING DEVICES
In order to charge a device, such as a smartphone for example, please
use the USB cable supplied (provided that the Micro-USB plug fits your
mobile device) or the original charge cable for your device. The Power-
bank likewise has a type-C output. Please use a suitable type-C cable
for this. Insert the USB plug of the cable into the POWERBANK and the
other end into your device. The charge process starts automatically.
The POWERBANK is equipped with Quick Charge 3.0. In order to be able
to use this technology, please check whether your end-device is
compatible.
Simultaneous charging of multiple end-devices is possible with res-
trictions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is com-
plete. Please disconnect your device from the POWERBANK once the
charge process is complete. Please note that the Powerbank cannot
be charged and discharged simultaneously.
The POWERBANK may heat up a little depending on the charge/
discharge current.

TECHNICAL DATA

1. Cell type:
2. Capacity:
3. Input:
Type C:
4. Output:
5. Accessories:
6. Operating temperature: 10°C to +45°C
7. Charge time:
8. Protective functions:
Li-Po rechargeable battery pack
20,000mAh / 74Wh
Micro-USB: 5V DC | max. 2000mA
5V DC | max. 2000mA
2x USB: 5V DC | max. 3000mA
Type C: 5V DC | max. 3000mA
Quick Charge 3.0:
5V - 6.5V DC | max. 3000mA
6.5V - 9V DC | max. 2000mA
9V - 12V DC | max. 1500mA
Data cable (USB to Micro-USB)
ca. 9 hours
Over-charging protection, deep discharge
protection, overload protection, short-cir-