Luminance Brands Kathy Ireland Home LK130BS El Manual Del Propietario página 9

3. Installation on Luminance Brands Fans Having a
Modular Switch Housing with Center Screw
3.12
Route the Fan Speed Control Chain through the Offset
Hole of the Bowl Cap (Figure 11) .
Route the Light Fixture Assembly Chain through the
Center Hole of the Bowl Cap (Figure 11) .
Place the Bowl Cap onto the Threaded Stud and
against the Glass Bowl .
Install the Bowl Cap and tighten the Finial Nut onto the
Light Fixture Assembly Threaded Stud (Figure 11) .
NOTE: It is critical that the fan chain(s) are aligned
with hole(s) in the light fixture assembly flange
and bowl cap for smooth operation of the fan
switch(es).
NOTE: It is advisable to periodically check the
tightness of the finial nut.
3.13
Attach the Chain, Pendant, and Coupling Assembly
(supplied) to the Light Fixture Assembly Control Chain
by connecting the Coupling onto the Light Fixture
Assembly Control Chain (Figure 12) .
Attach the Chain, Pendant, and Coupling Assembly
(supplied) to the Fan Switch Assembly Control Chain
by connecting the Coupling onto the Fan Switch
Assembly Control Chain (Figure 12) .
GLASS
BOWL
THREADED STUD
BOWL CAP
FINIAL NUT
Figure 11
GLASS
BOWL
LIGHT FIXTURE
ASSEMBLY
CONTROL CHAIN
COUPLING, CHAIN &
PENDANT ASSEMBLY
Figure 12
9
(continued)
FLANGE HOLES
FAN SPEED
CONTROL CHAIN
FAN SPEED
CONTROL CHAIN
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: LK130-1