Section
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 . Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 . Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Spanish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
READ AND SAVE THESE INSTRUCTIONS
WARNING
!
To avoid fire, shock, and serious personal injury,
follow all instructions carefully.
1. Read your Owner's Manual carefully before installing
the light fixture. Retain Owner's Manual for future
reference.
2. Be careful of the fan and blades when cleaning,
painting, or working near the fan. Before installing
or servicing the light fixture or ceiling fan, switch
power off at service panel and lock service panel
disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a warning device, such as a tag, to the service
panel.
3. Do not exceed the wattage indicated on fixture.
Table of Contents
Safety Instructions
Additional Safety Instructions for Installation
1. To avoid possible shock, be sure electricity is turned
2. All wiring must be in accordance with the National
3. Make certain no bare wires are exposed outside the
4. Follow the recommended instructions for the proper
2
off at the main fuse box or circuit breaker panel before
wiring.
Electrical Code "ANSI/NFPA 70-2017" and Local
Electrical Codes. Use the National Electrical Code
if Local Codes do not exist. The ceiling fan must be
grounded as a precaution against possible electrical
shock. Electrical installation should be made or
approved by a licensed electrician.
wire connectors.
method of wiring your new light fixture. If you do
not know enough about electrical wiring knowledge
or experience, have your light fixture installed by a
licensed electrician. Any electrical work not described
in this manual should be performed by a licensed
electrician.
WARNING
!
To reduce the risk of possible fire and electrical shock,
install only on Luminance Brands Ceiling Fan Models
rated for Damp Locations. Permissible to use this
Light Fixture on all Luminance Brands CF Model
Ceiling Fans installed in Indoor Locations.
Page
U.L. Model No.: LK130-1