Operation; Clean Air & Humidify Mode; Clean Air Mode - Sharp KC-860U Manual De Operación

OPERATION

Plasmacluster
ON/OFF Button
Clean Air MODE Button
CLEAN AIR & HUMIDIFY MODE
Use the Clean Air & Humidify Mode to quickly clean the air, reduce odors and to humidify.
1
Fill Water Tank. (See E-11)
2
Press the CLEAN AIR & HUMIDIFY MODE
Button.
• If the power cord was not unplugged between uses, the
unit will automatically re-start at the previously selected
settings.
3
Press the FAN SPEED Button to select the
desired fan speed. (See E-13)
About Automatic Humidify Mode
The Temperature/Humidity sensors automatically de-
tect and adjust humidity according to changes in room
temperature. Depending on the size and humidity of
the room, humidity may not reach 45 - 55 %. In such
cases, it is recommended that CLEAN AIR & HUMIDI-
FY/MAX MODE be used.

CLEAN AIR MODE

Use the Clean Air Mode when additional humidity is not required.
1
Press the CLEAN AIR MODE Button on the display.
• If the power cord was not unplugged between uses, the
unit will automatically re-start at the previously selected
settings.
2
Press the FAN SPEED BUTTON to select the
desired fan speed. (See E-13)
Fan Speed
Button
Clean Air & Humidify MODE Button
E-12
Quick Clean MODE Button
Temperature
64 and below
64-75
75 and above
Power OFF
Button
Humidity
55%
50%
45%