Using The Appliance; Maintenance And Cleaning; Technical Information - ECG RK 1865 ST Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
CAUTION
1.
Always use cold water when fi lling the kettle.
2. The water level must be between the MAX. and MIN. levels!
Hot water may spurt out if the kettle is overfi lled.
3.
Switch off the kettle before removing it from the base.
4. Always make sure the lid is well closed.
5.
The base and kettle body should not be wet.
6. Only use the kettle in combination with its original base.

USING THE APPLIANCE

Boil clean water twice before using the appliance for the fi rst time.
1.
Fill the kettle with water. Do not overfi ll the kettle, watch the water level indicator.
2. Place the kettle on its base.
3.
Switch the appliance ON after putting the plug into the outlet. The ON light indicates the water is being
heated.
4. The kettle will switch off automatically after the boiling process has fi nished.
5.
Unplug the cord from the outlet.
6. Do not open the lid when pouring the water out.

MAINTENANCE AND CLEANING

Always unplug the cord from the outlet before cleaning!
Wipe the outside of the appliance with a moist cloth and then wipe dry.
The scale fi lter can be removed for the cleaning process. Use designated and commonly available agents to
remove scale from the kettle.

TECHNICAL INFORMATION

1.8 l capacity
Stainless steel with polished surface
Concealed element under a stainless steel base
Central STRIX connector for a long service life
360° base with power cord storage
Lid safety lock
Boil dry protection
Removable and washable limescale fi lter
Blue backlit water gauge
Nominal voltage: 220–240 V~ 50/60 Hz
Nominal input power: 1850–2200 W
GB
19
Tabla de contenido
loading

Tabla de contenido