Sunny Health & Fitness P8100 Manual Del Propietário página 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1- 877 - 90SUNNY (877-
907-8669).
#35 M6*8 1pc
#85 S=13,14,15 1pc
#18 M8*40 4pcs
#19 GB/T 95-2002 8 4pcs
#86 6＃(86X35) 1pc
ASSEMBLY INSTRUCTIONS
#30 φ58*33(M10) 1pc
#85 S=13,14,15 1pc
#22 GB/T 889.1-2000 M8 3pcs
#21 φ19*φ9*t2 3pcs
STEP 1:
Remove 4 Flat Washers (No. 19) and 4 Bolts (No.
18) from Front Stabilizer (No. 3) and Rear
Stabilizer (No. 2) with Inner Hexagon Spanner
(No. 86).
Attach the Front Stabilizer (No. 3) and Rear
Stabilizer (No. 2) to the Main Frame (No. 1) using 4
Flat Washers (No. 19) and 4 Bolts (No. 18) that
were removed. Tighten and secure with Inner
Hexagon Spanner (No. 86).
Remove Bolt (No. 35) from Main Frame (No. 1) with
Crosshead Spanner (No. 85).
Insert the Tension Knob (No. 32) into the Main
Frame (No. 1) using 1 Bolt (No. 35) that is removed.
Tighten and secure with Crosshead Spanner (No.
85).
STEP 2:
Loosen and pull out the Adjustment Knob (No. 10)
and insert the Seat Post (No. 4) into the seat post
tube of the Main Frame (No. 1). Then, select the
desired height. Release the knob and re-tighten the
knob.
Attach Seat Slider (No. 5) onto Seat Post (No. 4).
Tighten and secure with the Adjustment Knob (No.
30).
Remove 3 Lock Nuts (No. 22) and 3 Flat Washers
(No. 21) from the back of Seat (No. 20) with
Crosshead Spanner (No. 85).
Attach the Seat (No. 20) onto Seat Slider (No. 5)
with 3 Lock Nuts (No. 22) and 3 Flat Washers (No.
21) that were removed. Tighten and secure with
Crosshead Spanner (No. 85).
11