Symbols On The Product; Risk Levels - GreenWorks DT40L00 Manual Del Operador

Ocultar thumbs Ver también para DT40L00:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
The temperature of 130°C can be replaced by the
temperature of 265°F.
Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
Have servicing performed by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is
maintained.
Do not modify or attempt to repair the appliance or
the battery pack (as applicable) except as indicated
in the instructions for use and care.
Any other service should be performed by an
authorised service representative.
Use only the tine cylinder that the applicance
matches, using other tine cylinder or attachment
might increase the risk of injury.
4

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate
the tool better and safer.
Symbol
Name
V
Volt
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
/min
Per Minute
Alternating
Current
Direct Cur-
rent
No Load
n o
Speed
Safety Alert
English
Explanation
Voltage
Current
Frequency (cycles per
second)
Power
Time
Revolutions, strokes, sur-
face speed, orbits etc.,
per minute
Type of current
Type or a characteristic
of current
Rational speed, at no
load
Precautions that involve
your safety.
Symbol
Name
Eye Protec-
tion
WARNING
--- Wet Con-
ditions
Read Opera-
tor's Manual
Maintain
Safety Devi-
ces
Looking Be-
hind While
Backing
DANGER ---
Keep Hands
and Feet
Away
DANGER ---
Keep By-
standers
Away
DANGER ---
Thrown Deb-
ris
DANGER ---
Steep Slope
Hazard
5

RISK LEVELS

The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
5
Explanation
Always wear eye protec-
tion with side shields
marked to comply with
ANSI Z87.1 when operat-
ing this equipment.
Do not expose the prod-
uct to rain or moist condi-
tions.
To reduce the risk of in-
jury, user must read and
understand operator's
manual before using this
product.
Do not open or remove
safety devices while the
tool is running.
Look down and behind
first to avoid tripping
when pulling back.
To reduce the risk of in-
jury, keep hands and feet
away from rotating parts.
Do not operate unless
discharge cover or grass
bag is in its proper place.
If damaged, replace im-
mediately.
Do not mow when chil-
dren or others are near-
by.
Remove objects that can
be thrown by the blade in
any direction. Wear safe-
ty glasses.
Use extra caution on
slopes. do not mow
slopes greater than 15
degrees.
MEANING
Indicates an imminently
hazardous situation,which,
if not avoided, will result in
death or serious injury.
EN
Tabla de contenido
loading

Tabla de contenido