Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Blower Direction/Oscillation
You can choose from the two following options:
1. Turn the device carefully with hands by holding the fan on the sides and
turning it either to the left or to the right until the limit stop. Warning: do not
exceed this limit. The device must have been switched off before. The
setting knob must be pulled out.
2. Select the automatic swinging direction by pressing in the knob. The
device swings automatically within a range of 90°. This function is active
only when the fan is on. To deactivate the function, pull out the setting
knob.
Cleaning
Always remove the mains plug before cleaning the device.
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
•
Warning
-
If you need to remove the safety guard: always switch the device off
and remove the mains plug.
-
Under no circumstances should you immerse the device in water for
cleaning purposes. Otherwise this might result in an electric shock or
fire.
Clean the outside of the device with a dry cloth without any additives.
•
If the device is very dirty wet a cloth with water and then wipe the device
•
dry once you have finished.
Conformity
This device has been tested according to all relevant current CE
guidelines,
2014/30/EU, and Low Voltage Directive 2014/35/EU, and has been
constructed in accordance with the latest safety regulations.
4
such
as
electromagnetic
compatibility
Directive
Instructions for use
Tabla de contenido
