Setting The Timer; Care And Maintenance; Technical Data - Beper POCKET HEATER Manual De Instrucciones

Pocket Heater Use instructions

SETTING THE TIMER

The appliance has a built-in timer that will automatically turn the unit off after a set amount of time.
l. While the appliance is plugged in and turned on, press the "Timer Button" to activate timer.
2. Repeatedly press 'Timer Button" to set number of hours before the appliance turns off. You can choose
between l-12 hours.
3. Once desired hours have been chosen, stop pressing "Timer Button" to set, the selected time will light for a
while before setting.
4. To cancel timer, turn the appliance off.

CARE AND MAINTENANCE:

WARNING: Before beginning any maintenance, unplug the appliance and allow to cool completely.
To clean, wipe the exterior with a non-abrasive, damp cloth.
CAUTION: DO NOT LET LIQUID ENTER THE HEATER.
DO NOT immerse the appliance in water.
Wait until the unit is completely dry before use.
The appliance has an overheating stop system, in case the item will stop due to overheating switch off and
unplug the item, wait for a while and plug again.

TECHNICAL DATA:

Power: 350W
Power supply: 220-240V ~ 50-60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
9
EN