Beper POCKET HEATER Manual De Instrucciones página 8

Pocket Heater Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
DESCRIPTION: Fig.1
1. TEMPERATURE UP BUTTON
2. DIGITAL DISPLAY
3. TEMPERATURE DOWNBUTTON
4. FAN SPEED BUTTON
5. TIMER BUTTON
6. ON/OFF SWITCH
7. PLUG ROTATION
8. PLUG ROTATION BUTTON
OPERATING INSTRUCTION:
l. Plug the appliance into power outlet. Use "Plug Rotation" for most convenient placement on wall. 2. Press "On/
Off Switch" on side of the unit to "On" position to turn on the heater.
3. Select your desired temperature. Use the '+" button to raise temperature or "-' button to lower
the temperature between 25°C- 32°C on "Digital Display."
4. Select your desired fan speed. Press "Fan Speed Button" to choose between High (HH) or Low (LL) on 'Digital
Display.'
5. When finished, press ''On/ Off Switch" to 'Off' position and unplug the appliance from power outlet.
PRONG DIRECTION ADJUSTMENT:
l. Press and hold "Plug Rotation Button."
2. Using your hand, gently turn prongs to desired position.
3. Release 'Plug Rotation Button"
8