Troubleshooting - Poulan PL3314 Manual De Instrucciones

Ocultar thumbs Ver también para PL3314:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WARNING! Always stop the unit and disconnect the spark plug before performing all of the
recommended remedies below except remedies that require operation of the unit.
TROUBLE: Engine will not start or will run only a few seconds after starting.
CAUSE
1. Ignition switch off.
2. Engine flooded.
3. Fuel tank empty.
4. Spark plug not firing.
5. Fuel not reaching carburetor.
TROUBLE: Engine will not idle properly.
CAUSE
1. Idle speed r e q u i r e s adjustment.
2. Carburetor requires adjustment.
TROUBLE: Engine will not accelerate, lacks power, or dies under a load.
CAUSE
1. Air filter dirty.
2. Spark plug fouled.
3. Chain brake locked.
4. Carburetor requires adjustment.
TROUBLE: Engine smokes excessively.
CAUSE
1. Too much oil mixed with gasoline.
TROUBLE: Chain moves at idle speed.
CAUSE
1. Idle speed r e q u i r e s adjustment.
2. Clutch requires repair.

TROUBLESHOOTING

REMEDY
• See "STARTING" in the STARTING AND
• See "Starting a Flooded Engine" in the
• Fill tank with correct fuel mixture. See
• Install new spark plug. See "SPARK PLUG" in
• Check for dirty fuel filter; replace.
• Check for kinked or split fuel line; repair or
REMEDY
• See "CARBURETOR ADJUSTMENT" in the
• Contact an authorized service dealer.
REMEDY
• Clean or replace air filter.
• Clean or replace plug and regap.
• Unlock chain brake. See "STARTING
• Contact an authorized service dealer.
REMEDY
• Empty fuel tank and refill with correct fuel
REMEDY
• See "CARBURETOR ADJUSTMENT" in the
• Contact an authorized service dealer.
16
STOPPING section.
OPERATION section.
"FUELING THE ENGINE" in the STARTING
AND STOPPING section.
the MAINTENANCE section.
replace.
MAINTENANCE Section.
POSITION" in the STARTING AND
STOPPING section.
mixture.
MAINTENANCE Section.
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pl3816

Tabla de contenido