Optional Kits; Accessories; Packing And Unpacking; Setting To Work - Connection To The Power Supply - Nilfisk cfm 125 Manual De Instrucciones

125/BDC1216/BDC1324/CV324/135/E-VAC1000

Optional kits

On request, the vacuum cleaner can be supplied with
optional kits already installed. However, they can also be
installed at a later date.
The following optional kit is available for converting the
vacuum cleaner:
- Absolute filter "H" kit (code 5 60357).
Please contact the manufacturer's sales network for further
details.
Instructions describing how to fit the optional kits and the
relative operation and maintenance manuals are supplied
together with the optional kits.
DANGER !
Use only genuine optional kits supplied and authorized
by the manufacturer.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
DANGER !
Use only genuine optional kits supplied and authorized
by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Cardboard box packing (fig. 2)
Model
A (mm)
B (mm)
C (mm)
Weight with packing (kg)
GB
09/2014
125
BDC1216
BDC1324
CV324
135
E-
VAC1000
680 680
610 610
1,100 1,100
40 41
Setting to work - connection to the power
supply
DANGER !
- Make sure that the vacuum cleaner is in perfect
condition before starting work.
- Before plugging the vacuum cleaner into the
electricity mains, make sure that the voltage rating
indicated on the data plate corresponds to that of
the electricity mains.
- Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
- Make sure that the vacuum cleaner is off.
- The plugs and connectors of the connection cables
must be protected against splashed water.
- Make sure that connections to the electrical mains
and plug are correct.
- Use the vacuum cleaners only when the cables
that connect to the electrical mains are in perfect
condition (damaged cables could lead to electric
shocks!).
- Regularly check that the connection cable does not
show signs of damage, excessive wear, cracks or
ageing.
DANGER !
When the vacuum cleaner is operating, do not:
- crush, pull, damage or step on the cable that
connects to the electricity mains;
- only disconnect the cable from the electrical mains
by removing the plug (do not pull the cable).
- only replace the electric power cable with one of the
same type as the original; the same rule applies if
an extension is used.
- the cable must be replaced by the manufacturer's
Service Centre staff or by equivalent qualified
personnel.
-4-