Finishing The Installation - D-Link DFE-690TXD Guía De Instalación Rápida

Finishing the Installation

A. Windows should automatically detect and install the adapter.
B. If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".
C. You can now remove the driver CD from the optical drive of your notebook.
Troubleshooting
1. If I've lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support below). Windows 2000 or XP in most cases will automatically install the
correct drivers.
2. What do I do if the installed card does not
seem to function properly?
• Check that the card appears under
START>CONTROL PANEL>SYSTEM
>HARDWARE>DEVICE MANAGER
>NETWORK ADAPTERS.
• If it does not appear, try removing and
reinserting the adapter into your notebook.
• If it appears with an error "!" or "?", remove or
uninstall the device by right clicking on the
device. Restart the computer, upon restart
Windows will redetect it. If error persists, try
removing the card and uninstalling the driver.
Repeat the installation process.
3