Recommended Use - NEC MultiSync LCD1990SXp Manual Del Usuario

Recommended Use

Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing
covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed
service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points,
which can be harmful or fatal or may cause electric shock, fi re or equipment failure.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fi re.
• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall,
causing serious damage to the monitor.
• When operating the MultiSync LCD monitor with its AC 125-240V power supply, use a power supply
cord that matches the power supply voltage of the AC power outlet being used. The power supply
cord you use must have been approved by and comply with the safety standards of your country.
(Type H05VV-F should be used in Europe)
• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use
with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.
• Do not place any objects onto the monitor and do not use the monitor outdoors.
• The inside of the fl uorescent tube located within the LCD monitor contains mercury. Please follow the
bylaws or rules of your municipality to dispose of the tube properly.
• Do not bend power cord.
• Do not use monitor in very hot, humid, dusty, or oily areas.
• Do not cover vents on monitor.
• If monitor or glass is broken, handle with care. Do not come in contact with the liquid crystal.
Immediately unplug your monitor from the wall outlet and refer servicing to
qualifi ed service personnel under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating instructions.
• Allow adequate ventilation around the monitor so that heat can properly dissipate.
Do not block ventilated openings or place the monitor near a radiator or other heat sources.
Do not put anything on top of monitor.
CAUTION CAUTION
• The power cable connector is the primary means of detaching the system from the power • The power cable connector is the primary means of detaching the system from the • The power cable connector is the primary means of detaching the system from the
supply. The monitor should be installed close to a power outlet which is easily accessible.
• Handle with care when transporting. Save packaging for transporting.
Image Persistence
Image persistence is when a residual or "ghost" image of a previous image remains visible on the Image persistence is when a residual or "ghost" image of a previous image remains visible on the Image persistence is when a residual or "ghost" image of a previous image remains visible on the
screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images
being displayed for a long period of time should be avoided. being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed.
For example, if an image was on the monitor for one hour and a residual image remains, the monitor For example, if an image was on the monitor for one hour and a residual image remains, the monitor For example, if an image was on the monitor for one hour and a residual image remains, the monitor For example, if an image was on the monitor for one hour and a residual image remains, the monitor
should be turned off for one hour to erase the image. should be turned off for one hour to erase the image.
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving
screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in
use.
THE MULTISYNC
®
LCD COLOR MONITOR:
30